rebuildable atomizer

[pellski89]

so guys ive had my twist for about 2 months and im looking to get a rebuildable.. im getting my provari next week... i would like to have a genesis style... or something that is high quality that can be a tank

 

[gavind4]

take a look at "did" r.b.a. on mmvapors.com or knockoffs on lots of vape sites for less$$$ i just love my DiD on provari. good luck.

 

[Z_Ghost]

I got a bliSS on a lavatube and it's working good.
It's my first RBA and I have made 3 wicks and 5 coils, this last one is really working.

 

[Lex0r]

If you can get your hands on a GG Penelope or Ody, that's the route I would take. Both are tank type RBA's and have clear tanks available to use if you like to see the juice. They are pricey though.

 

[evilferret]

Genesis mods + Provari is a bit hit or miss.

Or if you're set on the Provari, try one of the chinese Did Clones out before spending money and time hunting down the nicer ones.

Totally recommend an iHybrid. Search on forums and you'll be able to find it.

Uses Quartz Glass so won't have to worry about any jucies and its one of the easier Genesis mods I have to set up (only tried a Chid, Did, iHybrid and Orion).

Edit: Just want to warn you that Genesis mods have a learning curve to them. You're going to have to play with it quite a bit until you get it down to how you like it.

 

[helex]

simplest ,NGP with 510 connection

 

[komakino09]

the DID is the best genesis atty so far IMHO.

 

[recidivus]

I know it's not a tank, but if you can get Phoenix XL RBA they're great and hold a good amount of liquid, though you can't pocket it since the reservoir is open.

 

[tizz]

as others suggested, check out the cheaper chinese RBA's before dropping the big bucks on an orignal one. i have the dud with a clear tank and it works well.

 

[Aoi~]

Could start stalking ProVape's website/facebook for Z Atty Pro updates, that one comes prebuilt coil. Minimal fuss. Just learn how to rebuild while enjoying the Z-Atty.

 

[digunderground]

easiest RBAs to set up are fiberglass/ceramic wick models (oddy, penelope, phoenix, mark bugs infinity, etc). IMHO the best are Genesis style, but take more patience to learn and get working right. My 2c is if you get a genesis style, get a good one to start off.. Bliss, or DID is always reasonable and awesome. I have a few friends on here that have bought the chinese ones and had the chrome start flaking off exposing the brass = bad.

there is a co-op for a ss genesis for about $17 going on right now here: http://www.e-cigarette-forum.com/fo...on/342810-interest-aga-t-aotomizer-co_op.html

 

[emassive]

heres a nice one..

AGA Hydra - Rebuildable Atomizer - Stainless

 

[Devaper]

I got a GLV and a DID - then I bought another DID - and I haven't been using anything else (including the GLV) since. Well, except for my new Mini-DID....

 

[dasfast]

Tell me about that learning curve. I just had to walk away from the Griffon atty I just got. I'll come back to it when I have more patience.

Sent from a cheap imported tablet.

 

[mapo]

Tell me about that learning curve. I just had to walk away from the Griffon atty I just got. I'll come back to it when I have more patience.

Sent from a cheap imported tablet.

have a knock off just like the griffon was going to get that one but was sold out have mine working fine but wicks slow and is hard to fill (holes to small to let air out as you are filling) use a full size paper clip to roll wick should be able to slid in wick whole with the clip that will help in wrapping the coils. (keeps the wick from flexing ) and don't forget to oxidize the wick first.

 

[Lonnie]

Has no one on this thread played with the AC9. I use it on my provari (along with others) and have no issues. Its easy to get, whichs like a wet dog, vapes like a train. PM rip, maybe he has a secret stash

 

[bappo]

I have an AC9, 3 for 3 on successful coils. Works like a champ but you have to have the right mod to put it on as it draws a lot of current.

On the table next to me with HHV Pirates Booty

 

[theN3rv3]

Who is this Rip you speak of? I must get my hands on one these AC9's

 

[bappo]

Rip is the AC9 inventor man, from Vapinaze.com where you get them. I believe the next batch can be ordered now for delivery before xmas maybe?

 

[BoyNamedStacy]

If you want to go all out, go for the Z-Atty Pro. Provape site says more stock will be in on Nov 9 but I spoke to Dustin from Provape who said it will be more like the middle of Nov. Either way you go, rebuildables are fun and once you perfect the art of coiling and tilt vaping you'll be stoked.