Hi everyone anyone know of a great rebuildable atomizer that is small can be put on a small mod that will be able to put in my pocket without leaking or set on is side? i know those geneses type atty will eventually leak if left on is side or pocket. Do you guys recommend anything that is out there that is like great small and rebuildable...
- Status
Not quite sure about all genesis atomizers leaking.. I got 3 of them always filled with juice that i carry in a ziploc in my bag and there's been no leaking.. Now when i put vivis in the mix, there's some leaking action though insignificantly minimal.
From what I've heard the design of the Genesis's they are prone to leak? Possibly heard incorrectly or new changes since then. Never had a problem with my ViVi leaking, the only time I've found juice on the outside is when I've left juice on the threads, never when completely dry and twisted properly
Anyone have any ideas on where to get orings/seals for the new M o n s t e r M e s h R B A I just bought from G o t V a p e s? This thing leaks juice like you have never seen, it literally leaks out as fast as I drip it in. I fully expected to tinker, tweek, experiment with the coil to hit the sweet spot per the GV site but it has to perform the most basic duty of holding juice first. Vendors help consisted of sending me here to I guess find others who have the same problem. They basically told me this item is experimental and NOT CONSIDERED TO BE OPERATIONAL OUT OF THE BOX.
So does anyone know where to find orings/seals for this thing?
So does anyone know where to find orings/seals for this thing?
Didnt mean to hijack the thread, sorry krazyjk3.
He was looking for a non-leaking rebuildable atomizer and wanted him to know the one I have described above does look tempting. However it may not be the best choice. In addition it seems I cant post this anywhere on this site other than vendors, it seems none of my post with that particular vendors name in it are being submitted. hmmm
Dont have pics of mine at the moment but here is what they look like......
GotVapes MonsterMesh RBA by HCIGAR-2.4ohm Rebuildable Atomizer [gv-MonsterMeshRBA] - $17.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
He was looking for a non-leaking rebuildable atomizer and wanted him to know the one I have described above does look tempting. However it may not be the best choice. In addition it seems I cant post this anywhere on this site other than vendors, it seems none of my post with that particular vendors name in it are being submitted. hmmm
Dont have pics of mine at the moment but here is what they look like......
GotVapes MonsterMesh RBA by HCIGAR-2.4ohm Rebuildable Atomizer [gv-MonsterMeshRBA] - $17.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
I noticed this on their website:
Sorry Gelam, I don't mean to be condescending but I have to ask, what is your knowledge with electronics, specifically with working with them? This will help me help you, where exactly is it leaking from? Since I don't really have this device my help will be fairly limted
Sorry Gelam, I don't mean to be condescending but I have to ask, what is your knowledge with electronics, specifically with working with them? This will help me help you, where exactly is it leaking from? Since I don't really have this device my help will be fairly limted
It looks like the Chid/dud/griffen with a new name! The original is the DID. If you want one that doesn't leak, buy one of the original, real ones that are being cloned by China. They will run you over $100.
Or a Zap...
ETA: I don't know if the original DID leaks or not, but I do know that the clone of it needs to have the fill screw removed and mine does leak.
Or a Zap...
ETA: I don't know if the original DID leaks or not, but I do know that the clone of it needs to have the fill screw removed and mine does leak.
Last edited:
My DIDs leak easily with the fill screw removed. I find rolling a piece of mesh and stuffing it in the fill screw helps, also I now roll the main wick so thick it doesn' have a lage hole down the middle. With this setup I can leave it a good 10minutes without leaking.
you can rebuild the vivi mini atomizer. I just rebuilt mine yesterday works great and it was my first rebuild 
and of course if it is not a knock off vivi it won't leak
and of course if it is not a knock off vivi it won't leakI have fixed my problem with the leaking M o n s t e r M e s h - R B A from G o t V a p e s. I shopped at discountvapors and the griffin is the exact same unit with actual orings for the same price. Well, they sell a oring kit (not to be confused with cheap seals I got with my vendors model) with multiple orings in the kit for $1. I purchased that and a lot of other supplies from them as well. Too bad the vendor I purchased my unit thru couldnt cough up a buck for a couple of orings.
I have an original DID on a provari v2, I always leave them sideway when not using. .....it NEVER leaks.
I have 4 different gen. atties,The oldest one is 3 years old.None of them has ever leaked.My clone of the did which is a clone of the hybrid is becoming my favorite atty of the 4.
In most instances it isn't the arrow it's the Indian.
In most instances it isn't the arrow it's the Indian.
i guess ill just go with a drip mod so i dont have to worry about RBA like the geneses type
You can get around with genesis style atomizers, it's just that, you have to be mindful in keeping it upright. Meaning that, when you sit down, remember to take it out your pocket. Or when you drive, just set it upright on the car's cupholder, etc. It's not a big deal once you get used to it, but you know, it's just an extra thing to worry about.
This is what I have with me today, a provari mini with a genesis atty on it, and a Zmax with a carto tank. Guess which one is staying in the car, and which one is in my pocket
(Insert "Is that a Zmax in your pocket or are you just happy to see me?" joke).
I use an ERA on my VVG daily and toss it in my back pocket, no leaking, im sure its the same as a top fed
- Status
Similar threads
