Releaux dna200

[Randy Smith]

Bought one today. Love it. Hits way harder then my sig 150 and my xcube. But, I find the ohm readings with my crown 0.25 coils jump. Can I lock them? It's reading 0.33

Sent from my SGH-I337M using Tapatalk

 

[dbrandt01]

When the coil is cold, either new coil or haven't used it for some time lock it. It's I know they advertise it with Resistance Lock and it should be done how the other dna 200s are. With that being said stock coils typically won't read the exact ohms they advertise. For example when I had an Atlantis. They advertised 0.5, every device read it at 0.6 ohms... This is in a DNA 200 Datasheet.

Resistance lock:
The DNA 200 relies on the cold resistance of the atomizer to measure temperature
accurately. If the connection is not stable or if you find the measured resistance drifts with time, it may
be desirable to lock the atomizer resistance. To do so, while locked hold both the Fire and Up buttons
for two seconds to enter Resistance Lock mode. In this mode, the DNA200 will use the present atomizer
cold resistance without refinement until the atomizer is disconnected or the resistance lock is disabled.
A lock symbol will replace the ohm symbol on the display. To disable resistance lock, repeat the
procedure to lock
it.

 

[Oberon75]

Bought one today. Love it. Hits way harder then my sig 150 and my xcube. But, I find the ohm readings with my crown 0.25 coils jump. Can I lock them? It's reading 0.33

Sent from my SGH-I337M using Tapatalk

Great mod. People who swear by their Sigelei, Smok and IPV mods don't know what they are missing. While they get the job done if you want to quit smoking, there is a reason they only cost $50 to $80.

Sent from my LGLS991 using Tapatalk

 

[Randy Smith]

Great mod. People who swear by their Sigelei, Smok and IPV mods don't know what they are missing. While they get the job done if you want to quit smoking, there is a reason they only cost $50 to $80.

Sent from my LGLS991 using Tapatalk

How do you lock the resistance ?

Sent from my SGH-I337M using Tapatalk

 

[Randy Smith]

Great mod. People who swear by their Sigelei, Smok and IPV mods don't know what they are missing. While they get the job done if you want to quit smoking, there is a reason they only cost $50 to $80.

Sent from my LGLS991 using Tapatalk

And how did you get it to show battery percentage ?!

Sent from my SGH-I337M using Tapatalk

 

[dbrandt01]

Apparently you didn't even bother to read my post on how to lock the resistance ...
If you don't look over this one either, you change settings such as showing battery percentage in the EScribe software.

 

[Randy Smith]

Apparently you didn't even bother to read my post on how to lock the resistance ...
If you don't look over this one either, you change settings such as showing battery percentage in the EScribe software.

I did read it. It still didn't lock them. And I figured it out. Downloaded the escribe. First dna chip I've had and I LOVE it

Sent from my SGH-I337M using Tapatalk

 

[Oberon75]

I actually haven't even used the eScribe software yet. My laptop is down until i can buy a new screen. The shop I bought mine at programmed them and made them optimal for the LG HG2's. I might change that though. I hear WISMEC is recommending VTC 4's with this mod.

Sent from my LGLS991 using Tapatalk