Repairable Atty w/tank systems.

[HR15]

Hey all,
I've been searching and searching all over the webs for a repairable atty and tank system.
these are the ones that I'm interested in.

1. Genisis Mini/Maxi
2. Z-Atty Pro/U/G
3. I-Atti
4. Odysseus
5. Anything Similar.

Everywhere I go these are sold out or not being made anymore.

So my question is does anyone know where to get them or want to sell one.
Also will these fit the EGO-T 1000MaH

HR15

 

[jimini]

I have been looking for a Geneses for about 3 months now so good look... Sorry have not seen others but will keep u in mind if u wish...

 

[Huffelpuff]

Hi HR,

In order to get one of the above listed rebuildables, I recommend going to that vendor's thread to find out when they will be released and if you can get on a list to purchase. I can say that for the Z-Atty you can check House of Hybrids website for updates or post in Zen's thread to find out about when they will be released. Pop into the GG thread for updates on when the Odysseus will come back into stock or visit Clouds of Vapor website (US seller for the GG). iAtty1 is discontinued but appear in the classifieds from time to time. Also consider looking at the Classified section where you may find people selling them.

Good Luck in your Search!

 

[rober36]

Try looking for a bulli a2-t, you'll probably have the best chance of finding this one on his website. Right now they are all sold out, but since i bought mine a couple weeks ago I believe they have been available a few times.

Edit- I was looking at the site, you could buy all the pieces separately on the site and have a full a2.

 

[Scott]

You could order a My-T made by yenki69 on the modders section at the same place you'll find the Genesis Mini/Maxi/Line. Just ask him to add you to the list. It's similar to the Bulli, in that uses the ego type B tanks, but uses a repairable atomizer. I haven't tried it myself, but I should have one on the way shortly. It's not a genesis, in that it uses a fiber wick, but I have seen some people have made some very minor modifications to it to turn it into a genesis-style atty.

 

[Scott]

By the way, I was lucky enough to snag a Mini the last time they did a list and just got it a few days ago. It's a PITA to get set up at first, but once you get it working it works great. I'll never go back to cartos or chinese atties again.

 

[Renzuli]

Not to burst your bubble , but I have found that the EGO's don't have enough voltage to use the re-buildables . You have to make a very LR atty. for them to work at all . But that is only my opinion.

 

[Scott]

I've been running my Mini on my Provari, and it works great on that. I just tried it on my ego-T batteries, and they're not firing at all. I have seen videos of people using them on them, though... Some people say that you can raise the battery connector slightly with a toothpick to make it work. I haven't tried that, though, because I'm not really sure what I'm doing and don't want to fry the batteries.

 

[HR15]

I have been looking around but there is nothing for sale right now.
I've drawn some cad plans and im currently talking to a fitter and turner friend of mine, we think we could produce stainless genisis style attys pretty cheap with a clear pyrex/borosylicate tank, do u thinkg there would be much interest

 

[Bmays]

I'm sure there would be interest if it functioned properly and looked good. I do service work 8-5 and I started keeping the solid stainless steel rollers I replace because I wanted to make some tank caps (top/bottom). Went to a couple machine shops and they wanted like $150 to turn them out

 

[Scott]

There always seems to be tons of interest in these genesis style atomizers (which is why you can never find them LOL). I don't think you'd have any problems moving them. The pyrex tank is a real plus, too. All of the ones I've seen, other than the zenesis, either have the plexi or are solid SS.

There are a few genesis atomizers available right now, though. It's just a matter of finding them, and then waiting on a list. They're usually handled in lists and they tend to usually be on some of the other forums. There is the My-T, which is a repairable atomizer, not a genesis, but can be converted to one by extending the posts. These are made to order, not done in a huge list, so they should ship pretty quick. I signed up for one late last week, paid yesterday, and it should have shipped today. The same guy is also working on a new true genesis atty, with a polycarbonate tank. And there is also someone on the Romanian forums who is modifying ego-C atomizer bases and cones and turning them into a very small genesis atty that take the ego tanks... It looks pretty slick. I want one! I'm just not sure how to get it because I don't speak Romanian. LOL.

That being said, these things are still hard to find and made in small quantities with a high demand. You can get one, but you have to really scour for them, and you may not be able to get the one you really wanted right away. If you were going to build some good quality, cheap ones yourself, I'd be willing to bet that you would also have one of those highly sought after mods that is always sold out!

 

[vaptamist]

I'll chime in about the My-T, very solid device, great price, and all things considered, one of the easiest repairable atomizers to get a hold of at the moment. The guy who makes them is extremely friendly as well. Doesn't require a TON of power to run it - it ran just fine on my precise+ 10440, which uses pretty much the smallest battery out there.

 

[badmotivator]

Is anyone other than me curious about why these nice repairables are so unavailable? I mean, they don't seem to be technically sophisticated, and I doubt there are any patent concerns, so shouldn't the market be responding to the demand pretty quickly?

C'mon, machinists! C'mon, DIYers! C'mon, China!

Incidentally, I've got some mesh and Kanthal coming in the mail this week. I'm 'bout to do a down-and-dirty conversion of a standard tank cartomizer.

 

[imsoenthused]

The designer requested that they never be sold at a profit. Anyone making them for sale is defying his wishes. Opinions and rants ensue. I for one am very happy that atleast a few people are willing to face him down and try to make them available to the many people who want them. I keep watching house of hybrids waiting to snag a z-atty-pro.

 

[badmotivator]

Well, I'm with you. If this non-profit principle turns into unnecessary scarcity in practice, then that's busted.

But really? China can't help us out here?

 

[imsoenthused]

Most of the manufacturers want to keep churning out disposables and keep you as a steady revenue stream. Sell a man 5 cartomizers, and you'll sell him 5 more in a month. Sell a man a nice rebuildable atty and tank combo and he may never do business with you again. I imagine someone over there will jump on it once the few places producing them here start stepping up production.

 

[los8383]

http://www.e-cigarette-forum.com/fo...tvapes-stardust-how-re-wick-replace-coil.html

 

[Bmays]

The designer requested that they never be sold at a profit. Anyone making them for sale is defying his wishes. Opinions and rants ensue. I for one am very happy that atleast a few people are willing to face him down and try to make them available to the many people who want them. I keep watching house of hybrids waiting to snag a z-atty-pro.

I'm in line with you on the Z-Atty's. I have an Orion V2 and that was all it took for me to go Genisis nuts!

 

[JoeBallin]

im in the same boat... looking for a repairable atomizer with a tank... might give the stardust a try (even know its not at all what im looking for), anybody used one on a high volt mod?

 

[DCB305]

I believe there is one (genesis?) on sale in the classifieds forum for sale or trade.