Looking for a VV/VW PV that will utilize 2 18650s, a 26500 or a 26650 battery that also hits like a train. I currently am aware of the Beast Box, BAM, Bombshell Stinger, Curve, and Shan mods. Any opinion on these and other possibilities would be appreciated.
Requesting suggestions for hard hitting/large battery PV
- Thread starter jascom
- Start date
- th_trl_thread_readers 0
- Status
Definitely under 200. Prefer the 150 or less range short term. These are the only type of mods that I will be buying for the foreseeable future though so I would appreciate any additional knowledge concerning what is available.
Thanks Jazzi Mike. That is a nice mod. Huge, at least in length. Of course I realize given the nature of my query that most mods recommended will be larger than normal. Interesting how they have made the stacking of the 2 18650s safe. That one will go on my "for the future" list.
Sigelei Zmax V3 or V5 Telescopic Flat Top use your choice of 18350, 2x18350, 18490, 18500 or 18650 batteries. It's one of the shortest APVs available in most 18XX0 sizes.
The vital VV/VW info:
3.0 to 6.0 Volts, in 0.1V increments
3.0 to 15.0 Watts, in 0.5W increments
Big thread on the model.
http://www.e-cigarette-forum.com/fo...ic-flat-top-other-reports-one-week-later.html
The vital VV/VW info:
3.0 to 6.0 Volts, in 0.1V increments
3.0 to 15.0 Watts, in 0.5W increments
Big thread on the model.
http://www.e-cigarette-forum.com/fo...ic-flat-top-other-reports-one-week-later.html
Last edited:
Thanks YZER. But not quite what I was looking for. Want to be able to use 2 18650s, a 26500, or a 26650. Trying to get through a whole day without the need to carry extra batteries. There are heavy vapers then there is me! I am a HEAVY VAPER! And I am not talking sub ohm here, 1.8-2.0 is my typical range on a BCC.
Sorry jascom, I must of missed the 2x18650 part.
I vaguely remember seeing something about a 2x18650 wooden box mod a few years ago but it must have been a custom home-crafted mod. It wouldn't be too hard to make with the right tools.
I vaguely remember seeing something about a 2x18650 wooden box mod a few years ago but it must have been a custom home-crafted mod. It wouldn't be too hard to make with the right tools.
Ahh, no he doesn't make stacking safe. Safer than no protection but not safe. Disconnecting the circuit protects the battery from external shorts, that is shorts in the mod or carto but not internal battery shorts. The biggest danger with stacked batteries occurs when the batteries aren't balanced. In that situation one battery will work harder to produce the required current than the other and can the cause the over worked battery to heat up and start breaking down internally. Possibly leading to a runaway thermal event if not caught in time. Stacking batteries is not something to be taken lightly. They need to be matched from the beginning and monitored throughout their use.
Here you go. Out of stock here, though. From a builder in the Philippines.
ATB VV Myvape 2x 18650 - Pinoy Mods - MODS & Batteries
ATB VV Myvape 2x 18650 - Pinoy Mods - MODS & Batteries
You could always build your own using a LM2596 board and 2 18650's... Total VV
specs here. http://www.engineering.uiowa.edu/sites/default/files/ees/files/NI/pdfs/01/25/DS012583.pdf
My "Speed Stik" is running 4 days on 2 each 18650's when I normally have to change out singles every day.
You can custom it how ever you want to and there are several board versions.
Yes, you can laugh......
..but it only cost me a total of $10 (not counting the batteries..)
specs here. http://www.engineering.uiowa.edu/sites/default/files/ees/files/NI/pdfs/01/25/DS012583.pdf
My "Speed Stik" is running 4 days on 2 each 18650's when I normally have to change out singles every day.
You can custom it how ever you want to and there are several board versions.
Yes, you can laugh........but it only cost me a total of $10 (not counting the batteries..)
The BAM is great and can do everything you're looking for except for the 2 18650s. It can, however, take a 26650, 26500 + Kick, 18650, or even an 18490 + Kick. You can also use it for self-defense. The build quality is excellent, fits comfortably in the hand, it's made in the US and can be had for a very reasonable price at $119 or you can go for a blemished one for $100. Green is out of stock thanks to yours truly.
SupplyDaddy. Thanks for the info. No I am not laughing. Frankly I think that is great. If I had the knowledge and ability to do that I would probably never buy another mod. Not much of an engineer/electrician myself but I do know one of the B&M store owners here has some experience building box mods, so I may approach him about this. 10 bucks! WOW! Far more impressed with that than a 2,3, or 4 hundred dollar mod.
From the same shop I linked above this wooden box mod from ATB has some regulation and safety circuitry and can do 30 watts. It's in stock for ₱11,000.00 or $250 US dollars.
ATB 18650 x 2 TI Chip - Pinoy Mods - MODS & Batteries
ATB 18650 x 2 TI Chip - Pinoy Mods - MODS & Batteries
You might could achieve stacked 18650s by getting two Nemisis Clones and combining the two together?
Since I happen to have two of them sitting here and a 5 Ohm atty I'll give it a try.
This would NOT be VV or VW though.
Since I happen to have two of them sitting here and a 5 Ohm atty I'll give it a try.
This would NOT be VV or VW though.
Last edited:
I just tried it with two HCigar Nemisis Brass Clones...
A good tight fit, but since I only have flat top batteries and no spacers handy it isn't firing.
I ended up using all parts but the bottom barrel/cap/button of the second clone, and the two thin PTC fuse rings aren't needed, with button tops you might want one of the fuse rings with some atties..
To have room for some sort of regulator you'd need another kick ring or two.
Last edited:
Jascom, believe me, while I may know a few things, I'm ham-handed... As long as you have a soldering iron, this you can do!
Check out MadVapes DIY section for push buttons and 510 connector you like (pre-wired connection anyone??
) and Amazon for the LM2596 board selection, 18650 battery holders and 3 position voltage reader.. ON/OFF switch if you'd like and you can build your own!!- Status
Similar threads
