Returning to vaping, please advise

Status
Not open for further replies.

An Ita

Full Member
Jun 17, 2011
23
49
Grand Old Terra
Ok, so I haven't been vaping for a few years now, but I'm ready to start again. I have a variable voltage MonkeyBoxx that I would like to go back to as my main vaping tool. So I'd really like to know what people would recommend as far as atomizers and batteries and such to use with my MonkeyBoxx.

I had been using Vapage 2.0 ohm Hybrid BF atomizers and ICR123 750mAH batteries.

I might be interested in moving to rebuildables, I see that those are quite popular now. I know I have missed a lot of change. But basically, any suggestions on going back to vaping with my MonkeyBoxx is what I'm looking for.
 
  • Like
Reactions: Susan~S

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,694
68
Mpls/St.Paul, MN
Hello and welcome to the forum @An Ita. Glad to have you here!:)

It's been many, many years since I've seen a Monkeyboxx. If I remember the original modder recommended 16340 AW (protected) batteries for his box.

A lot has changed in the industry since then. I don't know if there are any "safe-chemistry", "high-drain", IMR (Li-Mn) or IMR/hybrid cells that would fit in your mod. @Baditude has some great battery blogs you might be interested in:
My best guess is you will be limited to building at +2.0Ω coils, even if you find some IMR cells that would fit (due to the wiring of your box).

As far as RDA's (rebuilding dripping atomizers) you could check on the REOS MODS website. They have some bottom feeding rebuildables that would fit in your catch cup. I use an RM2 on my REO wooden box mod (pictured in my Avitar).

Another blog by Baditude: Information Resources for Your First RBA
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread