Revenger Clock

[Golfdave]

is there a way to change the 10 second timeout before the clock starts?

 

[Tonee N]

This is all that I see as far as the clock display, probably the same as yours.

3.Screen Display:
After switch on, the OLED displays voltage resistance, battery level, temperature, output wattage etc. The display will change to Real Time Clock after 10 seconds if unused and the Real Time Clock will be shut off after 15 minutes if unused. Press “+” or “-“ or Mode button once and the screen will be lit with Real Time Clock display and press “+” or “-“ or Mode button again, the screen will be lit with main manual. Press the fire button at any time, the screen will be lit with main manual.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Golfdave]

I could swear I read it online and adjusted mine, But I reset to default and lost it. Now I can't find the reference anymore

 

[BrotherBob]

is there a way to change the 10 second timeout before the clock starts?

Welcome and glad you joined.
Could contact:
Local vape shop -----Might be simple.
Distributor ---see if they will advise.
Mist Hub: +1 (888) 269-0999 / sales@misthub.com
Manufacturer contact ---see if they will repair or replace or advise.

 

[Smoke_too_much]

7) Screen Timeout: The default timeout setting is 10 seconds of main manual and then switch to Real Time Clock for another 15 minutes. The timeout setting could be adjusted from 3 seconds up to 60 minutes. Enter the Screen Timeout and adjust the time up or down as you wish. For example, if you choose 3 seconds, after 10 seconds of showing the main manual, the display will be showing 3 seconds of Real Time Clock.

8). Default: You could reset to default setting by entering Default and pressing YES.

 

[suprtrkr]

You've got your answer, so I'll just say hi and welcome.