Rx200s

[smacksy]

I have 3 mods that use three batts, one 26650 mod and my well used dual batt ipv4..
I get almost 2.5 days on the 300w Koopor Primus vaping the same CloudBeast .15 ohm coil at 125w
Like I said earlier I get about 1.5 days on both the RX200s and black RX200..

Could be I get better run times with the Koopor because all three batts run in parallel, (as per pic)....the RX mods run in series...
I've heard other folks having issues with the RX200(s) but fortunately I'm not one of them..
I don't run TC so maybe that's why they have performed so well for the last 4 mos vaping them in rotation everyday...just my 2¢

Sent from my XT1585 using Tapatalk

 

[Newtothevapelyf3]

How do I check what software i'm on??

 

[Fozzy71]

How do I check what software i'm on??

by plugging your mod into your pc via usb and launching the UpdateWismec.exe that comes with any of the firmware downloads. 4.13 is only a couple weeks old so chances are you do not have the latest version.

 

[xXxelis_prxXx]

How do I check what software i'm on??

Pres fire bottom 20 times it will tell you the firmware


Sent from my iPhone using Tapatalk

 

[Fozzy71]

Pres fire bottom 20 times it will tell you the firmware


Sent from my iPhone using Tapatalk

ha, i was just coming back to mention this. I always forget about that method. I think u need to power it off with 5 clicks first, right?

 

[Newtothevapelyf3]

by plugging your mod into your pc via usb and launching the UpdateWismec.exe that comes with any of the firmware downloads. 4.13 is only a couple weeks old so chances are you do not have the latest version.

Then why would it be draining batteries so fast?

 

[Fozzy71]

Then why would it be draining batteries so fast?

no idea. does this happen with all of your batteries or do you just have the one set?

i have 4.13 and don't have that problem with any of the 6 sets of batteries I run in it. the 4.03 version (the first release of 4.13 before they renamed it to 4.03) is the version that had the battery drain issue I think. I dont know if any of the earlier versions had the issue as I just got my rx mods recently and promptly updated them.

 

[smacksy]

no idea. does this happen with all of your batteries or do you just have the one set?

i have 4.13 and don't have that problem with any of the 6 sets of batteries I run in it. the 4.03 version (the first release of 4.13 before they renamed it to 4.03) is the version that had the battery drain issue I think. I dont know if any of the earlier versions had the issue as I just got my rx mods recently and promptly updated them.

For what it's worth
I have the earlier 4.00 version and have had no issues at all with three sets of married batts I use in mine...
I don't own a PC so I can't do updates.. that said I run in wattage mode 10O% of the time..

Sent from my XT1585 using Tapatalk

 

[xXxelis_prxXx]

ha, i was just coming back to mention this. I always forget about that method. I think u need to power it off with 5 clicks first, right?

Yup


Sent from my iPhone using Tapatalk

 

[xXxelis_prxXx]

For what it's worth
I have the earlier 4.00 version and have had no issues at all with three sets of married batts I use in mine...
I don't own a PC so I can't do updates.. that said I run in wattage mode 10O% of the time..

Sent from my XT1585 using Tapatalk

Las firmware have pre heat options is really nice



Sent from my iPhone using Tapatalk

 

[smacksy]

Las firmware have pre heat options is really nice



Sent from my iPhone using Tapatalk

Yeah, I have 5 pre heat choices in my Koopor Primus.. preheat is nice

Sent from my XT1585 using Tapatalk

 

[DragonNC]

Ok guys , GREAT NEWS !!!

Updated yesterday my RX200S to 4.13 & battery last longer.
Same 18W vape on my kayfun V3 mini & after 2 tanks of juice battery is on 94% from 100%.
Before update battery was on 85%.

On lower wattage , vape it is improved .Will test it tommorow on 0.3 coil to see what will say.

 

[KenD]

I have 3 mods that use three batts, one 26650 mod and my well used dual batt IPV4..
I get almost 2.5 days on the 300w Koopor Primus vaping the same CloudBeast .15 ohm coil at 125w
Like I said earlier I get about 1.5 days on both the RX200s and black RX200..

Could be I get better run times with the Koopor because all three batts run in parallel, (as per pic)....the RX mods run in series...
I've heard other folks having issues with the RX200(s) but fortunately I'm not one of them..
I don't run TC so maybe that's why they have performed so well for the last 4 mos vaping them in rotation everyday...just my 2¢

Sent from my XT1585 using Tapatalk

Sorry, again, but the batteries in the Koopor are not in parallel. Check DJlsb Vapes' review, starting at about 18:30.



In fact, a parallel orientation would probably make the device less efficient, particularly at the ridiculous battery boosting required to reach 300w. Bucking is more efficient.

Sent from my M7_PLUS using Tapatalk

 

[SteveS45]

Like @Fozzy71 said just plugging it into a PC is actually faster then powering off and pressing the button 20-25 times! Great to be able to check it without a PC but it is a PIA.

 

[smacksy]

All I know all three batts go in the same way in the Kooper, and i do get better run times than the RX mods that have two going one way and one the other..call it parallel or series, whatever..lol

Sent from my XT1585 using Tapatalk

 

[KenD]

All I know all three batts go in the same way in the Kooper, and i do get better run times than the RX mods that have two going one way and one the other..call it parallel or series, whatever..lol

Sent from my XT1585 using Tapatalk

Call it series because it's series, and understand that a parallel configuration does not by default provide battery runtime.

Sent from my M7_PLUS using Tapatalk