Segeli #20 Switch

[Foxman]

OK I looked back 10+ pages and didn't see what I need. I got a Segeli #20 and the switch is Stuck. I tried several different batts and atty's and anything I put it on it Fires as soon as I screw the atty down and make contact. I've also tried the Button in all settings from off to on and everything in between, lol. Can I get a new switch for it? If so can you link me to a new switch? Thanx

 

[Unforeseen]

Moved from Variable Voltage APV Discussion to APV Discussion

 

[EatBacon]

Not trying to be an ...... My advice is not to put any more cash in that mod. You don't have to spend a lot just get something that works, everyone loves the Nemesis clones which work very well. The new Stingray clones are great and their prices will drop with a little time. I'm only bringing up clones due to the mod you currently have in comparison. Good luck.

 

[Foxman]

Understand EatBacon, but I'm a Top button kinda guy, lol. I don't like the Bottom OR Side button Mechs.

 

[crxess]

First question - Which version sigelei #20 do you have 0 there have been 4-5 updates - 1 for bottom spring, 3-4 for switch issues
Different Versions have different parts and different approaches to disassembling. - They can be rebuilt or modified...(or trashed)

Second Question - What is the lowest ohms you Vape?

IF - you vape Below 1ohm
IF you Vape near 1ohm and Chain Vape
You need to Find a better suited Mod for the job.

If you vape at a regulated pace and above 1.3ohms, it should not have failed.
I have 2 original #20's now a year old(roughly) and both work fine. I NEVER attempt sub ohm Usage with these.

 

[kc0716]

First question - Which version Sigelei #20 do you have 0 there have been 4-5 updates - 1 for bottom spring, 3-4 for switch issues
Different Versions have different parts and different approaches to disassembling. - They can be rebuilt or modified...(or trashed)

Second Question - What is the lowest ohms you Vape?

IF - you vape Below 1ohm
IF you Vape near 1ohm and Chain Vape
You need to Find a better suited Mod for the job.

If you vape at a regulated pace and above 1.3ohms, it should not have failed.
I have 2 original #20's now a year old(roughly) and both work fine. I NEVER attempt sub ohm Usage with these.

As long as the battery can handle it, wouldn't seglei 20w able to handle sub-ohms? since it goes to 20watts..

 

[crxess]

As long as the battery can handle it, wouldn't seglei 20w able to handle sub-ohms? since it goes to 20watts..

Wrong Mod - Op has the Sigelei #20 - A mechanical Mod

 

[Foxman]

Wrong Mod - Op has the Sigelei #20 - A mechanical Mod

correct. I know the switch can be replaced. Just don't know where to start looking, lol
I watched a video on it the other day, but I need to find the spring.

 

[crxess]

You will actually have to make the spring. Maybe something close from Ace Hardware or Lowes.