sigelei 100w ohm reader constantly jumping?

[dbrown12]

Hey guys! i've been having a huge problem with my sigelei 100w ohm reader just jumping all over the place when i vape. it changes every few pushes and varies anywhere from .5 to 1.2 which is really obnoxious because when you dont notice it change you almost always get a dry hit. what do i do?

 

[NancyR]

in most cases when an ohm reader is jumping there is a short in the coil

 

[ckquatt]

Yep. What they said. Check to make sure your post screws are down tight, or if your using a tank with coil packs make sure that's screwed in real good.

 

[dbrown12]

alright ill give it a shot, thanks

 

[erikbal]

Is it the regular 100w or the 100w+? If it's the regular then it's possible the 510 pin needs adjusted.

Sent from my VS980 4G using Tapatalk

 

[roxynoodle]

Could be your atty, could be your 510 pin, or could need a new 510. The threads for the 510 pin are worn on mine now so I need to adjust the pin several times a day now. It will be getting a Varitube replacement.

 

[dbrown12]

all fixed with me tightening the posts up a bit!

 

[Wolfenstark]

For me my one has only changed when there has been a problem with the coil or when the 510 screw on my lemo had been screwed back in , possibly from screwing it on the mod on and off.