Sigelei 100W Plus vs Pioneer4you IPV4

[vlahmapoutras]

I am in that phase that I could limit my future purchases to two

Sigelei 100W (PLUS) Box Mod - Eciggity

iPV4 100 Watt Box Mod - Eciggity

It will be mostly used with an Atlantis,a Kanger Sub-ohm and an eleaf Melo.And though the used watts range will be 30-40 the dual battery is a feature I really like.So which one would you choose for my case?

PS.Can either of them operate with a single battery?

Thanks in advance.

 

[tFOrRESTee]

No one has ipv4 (presale) yet so not sure which one is better, sigelei 100+ is great but the ipv4 specs look fantastic.

Both devices are serious mods, not parallel mods, so they both need 2 batteries.

 

[Kloverz158]

Yea the new Ipv4 on paper looks great usb charging magnetic doors thats very impressive. Sig-100w have the history to back it up.

 

[vlahmapoutras]

Based on specs I prefer the Ipv4.
Price is similar.
Did th Sigelei 100+prove to be trustworthy?
What about the chips they both include?

 

[Kloverz158]

Yea its better then the original Sig 100w. I was in the market for a new box mod so I ended up with the Sig-150w it have all the feature from the 100w+ and some better quality. And I got a super nice deal on it. Yea the chip is including in order for the mod to run if I misunderstood plz lmk thx.

 

[vlahmapoutras]

I know the chips are included. I was asking for a comparison of the two chips.

 

[vlahmapoutras]

Are the chips the same?

 

[Kloverz158]

If im right they both use the same chip. Sx-330

 

[vlahmapoutras]

Ok. I think I will go for the Ipv4. They both use the Yihi SX330 V3C.

 

[Northernshrink]

I'm liking the IPV line but seriously could they not move the USB port to a more user friendly location ? I have never had great luck with tanks not leaking so I allways remove them when charging. That said I just watched this video https://m.youtube.com/watch?v=ibSE4K91lU0 and it appears there may be another port on the back which confuses me as why they would add a second instead of just having one conveniently placed.

Curious to see what is actually delivered once they hit the shelves there's been a fair bit of unknowns and here say on this one.

 

[HDMontana]

I'm liking the IPV line but seriously could they not move the USB port to a more user friendly location ? I have never had great luck with tanks not leaking so I allways remove them when charging. That said I just watched this video https://m.youtube.com/watch?v=ibSE4K91lU0 and it appears there may be another port on the back which confuses me as why they would add a second instead of just having one conveniently placed.

Curious to see what is actually delivered once they hit the shelves there's been a fair bit of unknowns and here say on this one.

It has a USB port for software updates, and a round port up high for charging. Does not charge via USB.

HD

 

[Kaana]

get the sig

looks like ipv4 will be avaliable in the summertime

 

[Hammy75]

I just got the Sig 100W+. Very well built nice mod. Battery life is good running a Delta2 at 35-40 watts. I like it a lot but it's big. Both mods you are looking at are large so not a difference eitherway.

IPV4 has had its release date pushed many times so hard to say when it will be available. I will be picking one up when they are released as it has temp protection and Sig does not. Hopefully it's out soon but I wasn't going to wait and 2 is often better then one.

I guess the way to look at is if you can wait only want one then the IPV4 offers more features with temp control being the kicker. If you don't want to wait the Sig is a great mod so hard to go wrong.

 

[dems86]

Where is everuyone pre-ordering their IPV4? I see e-ciggity has them for $94.99, but MyVaporStore is selling them for $79.99 right now for pre-order.

 

[MattyTny]

Both will work well. The Sig is great and I'm sure the IPV4 will preform well when released.

I like the least features on these new boxes. The IPV line incorporated the touch button and on board charging, neither of which I like since it adds more things to go wrong in the box. That's just my opinion though, I'm sure it still works without problems.

 

[Highwayman1224]

Maybe I'm looking at the description wrong, but has anyone noticed in the description for the ipv4 it says "temperature control via software update"? I'm not interested in one cause I just received my sx mini m class, but thought I'd share this with everyone. Like I said, I'm kinda confused about the software update thing.

 

[Kaana]

Maybe I'm looking at the description wrong, but has anyone noticed in the description for the ipv4 it says "temperature control via software update"? I'm not interested in one cause I just received my sx mini m class, but thought I'd share this with everyone. Like I said, I'm kinda confused about the software update thing.

Dont worry it's old news, they upgraded software at the end of the production before packing up

thats what they told I mean, we'll see

 

[dam718]

Something I find interesting about the iPV series mods and the Sigelei mods, even though they are using the SX330 chips, the layouts of the screens are different. I prefer the layout of the iPV devices better. The grid style screen of the Sigelei devices just looks cheap to me. I'm sure they perform fine, great even, I just don't care for the screen. Extremely subjective point of view... LoL

 

[sando7]

the IPV4 i pr-ordered uses the YiHi SX330 V4S Chip.....pre-orderd mine from here...also my original Sig 100 still kicks Tail & i use it every-day after several months of service.
IPV4 100 Watt Box Mod by Pioneer4You