Sigelei Fuchai 200W Parallel or Series?

[BrandonToups]

Hi
I have a Sigelie 200w Fuchai and currently am trying to vape at 0.11 ohms and go up to higher wattages. I was wondering if this mod draws the current from both batteries there for splitting the amp draw between them. Just trying to be safe thanks for all the help!

 

[Ben85]

Best ask this in the vv/vw section as you will get the help you need. This is a section for mech mods.

Good luck!

 

[sonicbomb]

Yes the mod will draw current equally from both batteries, whats important here is which batteries.
If you are using a pair of good 20 amp then you should not go above 120 watts. If you are using a pair of true 30 amp batteries then don't go over 180 watts.

 

[BrandonToups]

Yes the mod will draw current equally from both batteries, whats important here is which batteries.
If you are using a pair of good 20 amp then you should not go above 120 watts. If you are using a pair of true 30 amp batteries then don't go over 180 watts.

Thanks buddy this really helps!

 

[classwife]

Moved to TC from Mech Mods

 

[KenD]

Series or parallel doesn't matter with vw mods. The amp draw per battery will be identical.

Sent from my M7_PLUS using Tapatalk