Smoant Taggerz 200w TC Kit Review
Thanks to Smoant for sending me this mod:
For more information view the smoant site
Kit includes
Smooth Taggerz TC mod
Replacement Taggerz disposable tank
USB cable
User Manual
Warranty card
Quality certificate
Leaflet for the refil
Playground for the right battery wrap
Specifications of the Mod Taggerz TC
Dimensions: 51x90x31.5mm
Output: 1-200 W.
Battery: 2 × 18650 (not included)
User mode: VW / DVW / TC (Ni, SS316, Ti) / TCR
Resistance limits: 0.05-3 ohm (VW, DVW) / 0.05-2ohm (TC, TCR)
Display: 0.96 inches OLED
Specifications of the Smoke Taggerz disposable tank
Dimensions: 22x36mm
Capacity: 2 ml
Upper filling
Coil: 0.2ohm (10-50W with DWN * inserted I will talk about it in detail later in this function) - better use at fixed 40-45W
Adjustable lower airflow control
The Smoant Taggerz TC kit consists of the 18650 Taggerz TC mod dual battery and the disposable tank, 6 colors available to choose from: black, rose gold, gray, red, blue and graffiti.
The Taggerz was designed to be a super light and ergonomic mod, weighs only 90 grams without batteries, the weight of two chicken eggs, a medium-sized chicken egg weighs about 49 g!
The maximum output is 200 W and various user modes are available, including:
VW with 1-200w regulation (very fast), up to 100w it is possible to adjust the increase or decrease by 1 decimal at a time, while from 100-200 the adjustment is 1w at a time.
The DVW function is a sort of prehit on the contrary, once selected it has pre-set min / max values and cannot be modified, this function can be "experimented" practically only using the standard tank, in fact thanks to the wide range of use allowed by these coils, when the fire is pressed the activation starts already at 10W by default, continuing with a gentle progression of power, always increasing during the entire arc of the shot, until reaching the 50W max of default, I struggle to understand the usefulness, I can only imagine that it is a system to preserve the coils longer, in this case at the expense of the activation speed.
Temperature control is present in the modes (Ti, Ni, SS316) and TCR.
The bypass function is absent, probably replaced by the original system already mentioned DVW
On one of the side panels we find the OLED 0.96-inch screen at the top, protected by a sort of plexy-colored smoky triangular shape, which allows the chip settings to be read well only in a domestic environment, unfortunately the same cannot be done. can say in conditions of sunlight outdoors.
in the schematic vw the ohm of the coil are visible, the notches of charge of the batteries represented by a single element, the volts and the puffs these last two are visible only during the vaping, doing a bit of contortion.
the other low triangular area is decorated in carbon look and houses the balance of the plus and minus keys, below is the usb socket.
Thanks to Smoant for sending me this mod:
For more information view the smoant site
Kit includes
Smooth Taggerz TC mod
Replacement Taggerz disposable tank
USB cable
User Manual
Warranty card
Quality certificate
Leaflet for the refil
Playground for the right battery wrap
Specifications of the Mod Taggerz TC
Dimensions: 51x90x31.5mm
Output: 1-200 W.
Battery: 2 × 18650 (not included)
User mode: VW / DVW / TC (Ni, SS316, Ti) / TCR
Resistance limits: 0.05-3 ohm (VW, DVW) / 0.05-2ohm (TC, TCR)
Display: 0.96 inches OLED
Specifications of the Smoke Taggerz disposable tank
Dimensions: 22x36mm
Capacity: 2 ml
Upper filling
Coil: 0.2ohm (10-50W with DWN * inserted I will talk about it in detail later in this function) - better use at fixed 40-45W
Adjustable lower airflow control
The Smoant Taggerz TC kit consists of the 18650 Taggerz TC mod dual battery and the disposable tank, 6 colors available to choose from: black, rose gold, gray, red, blue and graffiti.
The Taggerz was designed to be a super light and ergonomic mod, weighs only 90 grams without batteries, the weight of two chicken eggs, a medium-sized chicken egg weighs about 49 g!
The maximum output is 200 W and various user modes are available, including:
VW with 1-200w regulation (very fast), up to 100w it is possible to adjust the increase or decrease by 1 decimal at a time, while from 100-200 the adjustment is 1w at a time.
The DVW function is a sort of prehit on the contrary, once selected it has pre-set min / max values and cannot be modified, this function can be "experimented" practically only using the standard tank, in fact thanks to the wide range of use allowed by these coils, when the fire is pressed the activation starts already at 10W by default, continuing with a gentle progression of power, always increasing during the entire arc of the shot, until reaching the 50W max of default, I struggle to understand the usefulness, I can only imagine that it is a system to preserve the coils longer, in this case at the expense of the activation speed.
Temperature control is present in the modes (Ti, Ni, SS316) and TCR.
The bypass function is absent, probably replaced by the original system already mentioned DVW
On one of the side panels we find the OLED 0.96-inch screen at the top, protected by a sort of plexy-colored smoky triangular shape, which allows the chip settings to be read well only in a domestic environment, unfortunately the same cannot be done. can say in conditions of sunlight outdoors.
in the schematic vw the ohm of the coil are visible, the notches of charge of the batteries represented by a single element, the volts and the puffs these last two are visible only during the vaping, doing a bit of contortion.
the other low triangular area is decorated in carbon look and houses the balance of the plus and minus keys, below is the usb socket.