Does anyone know what the ratings are on the Magneto? When I build coils how far can you push the Magneto?
Smok Tech Magneto
- Thread starter Mr Mohon
- Start date
- th_trl_thread_readers 0
- Status
It's not a bad idea to just stay on the first thread you started. I posted there for you.
It's about the battery not so much the mech that you need to concerned with.
It's about the battery not so much the mech that you need to concerned with.
Last edited:
The Magneto is a mechanical mod. There's really no lower limit to resistance on the coil, short of what's safe.
I tend to build mine around 1-1.2Ω.
Just make sure you use the right type of battery and know what your battery is capable of handling. Vape safe
It's a combination of resistance and battery. The amp draw has to be under the continuous amp limit of the battery.
I had a magneto and I was at .4 Ohms and my friend used one at .3, It's the battery that matters.
I'm pretty sure I have a good battery, if not the best battery for the job. It is an Efest IMR 18650 2500 mAh 3.7V LI-MN High Drain Rechargeable Battery , Flat Top , Purple , 35 AMPS.
Amazon.com: Efest IMR 18650 2500 mAh 3.7V LI-MN High Drain Rechargeable Battery , Flat Top , Purple , 35 AMPS: Electronics
Amazon.com: Efest IMR 18650 2500 mAh 3.7V LI-MN High Drain Rechargeable Battery , Flat Top , Purple , 35 AMPS: Electronics
Im not agains sub-ohming. I just don't want to hurt myself yet. Wanting to get into this safely and hear that sub-ohming is more dangerous than stay higher while you learn.
Not all 18650's are created. There is a lot of different 18650 batteries out there with different ratings.
- Status
Similar threads
