SMOKtech Plastic 18650 510 BOLT Rubberized Paint, Vented Chrome-plated base - ALL COLORS, Economical, Comfortable, Lightweight, Well-performing

[dannoman]

[h=3]SMOKtech Plastic 18650 510 BOLT Rubberized Paint - ALL COLORS[/h][h=3]$19.95[/h]Introducing the one piece SMOKtech platic BOLT 18650 mod with chrome plated vented battery cap at the bottom - 510 connection.

Injection molded plastic for durability with rubberized paint. It does have a nice soft rubberized feel. Very nice feel in the hand, lightweight.

A protected battery can work on this mod but installation takes a bit more effort than a slightly shorter unprotected IMR battery.

We carry all six colors: black, white, pink, purple, red & yellow.

• You will receive one SMOKtech Plastic 18650 Bolt.
• Slightly raised 510 connection.
• Horn style power button
• Vent hole in chrome-plated battery cover at base (see picture at left)
• 4 inches high by 15/16th of an inch wide.
• Weighs 1.2 ounces without battery.
• Battery or charger not included.
• Warrantied for 14 days against manufacturer defect in the switch. Your warranty would begin after you receive the unit.

SMOKtech 18650 Plastic BOLT : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[yiddleboge6]

Yay!!!!! COLORS!!!!!!!! Briar, yoooo hoooooo Briar! They come in YELLOW!!!!

 

[silversx]

have the credits been issued for the raven? ready to use them up!

 

[Briar]

Yay!!!!! COLORS!!!!!!!! Briar, yoooo hoooooo Briar! They come in YELLOW!!!!

Yes-yes-yes-yes-yes!!! I'm going to get both purple and yellow - I use IMRs pretty much exclusively, so it's cool. Plus, it looks to me like there is a tiny gap between the two halfs, don't know if that's on purpose or not, but it sure makes for good venting!

 

[rdsok]

Yes-yes-yes-yes-yes!!! I'm going to get both purple and yellow - I use IMRs pretty much exclusively, so it's cool. Plus, it looks to me like there is a tiny gap between the two halfs, don't know if that's on purpose or not, but it sure makes for good venting!

If you plan on using a Kick with these... use either the IMR 18490 or 18500 batteries since they don't have extentions ( at least not yet )

 

[Ctor]

If you plan on using a Kick with these... use either the IMR 18490 or 18500 batteries since they don't have extentions ( at least not yet )

The kick probably won't work with a plastic bodied mod. From their site:

GROUND SPRING
You will notice a small spring attached to the top (side edge) of the Kick. This has been carefully designed and is an ESSENTIAL component of the Kick for proper functioning. The spring MUST make contact with the grounded inner wall of the battery tube. If this spring does not make contact, the Kick will not function. A few devices have anodised or powder coat finishes on the inside of the battery compartment - this can interfere with the ground connection. These coatings must be removed at the point of contact with the ground spring. (This does not apply to the Super-T Precise and Precise+ range).
NOTE: DEVICE TUBES VARY - The internal diameter is wider on some and narrower on others. Please do not use the Kick in tube mods with an internal diameter greater than 19.5mm.

 

[rdsok]

The kick probably won't work with a plastic bodied mod. From their site:

Then there is that... I'm blaming the headache I've had since early this morning...

 

[Briar]

Yeah, Kick won't work - I'm just going to use them as a cute little backup. Yellow, purple... can't pass it up. LOL

Besides, the price is soooo right...

 

[silversx]

briar whats the status of the credits for ravens .. and since kick dont work with plastic.. i can't freaking wait to see the gunmetal bolt!!!!!!!!

 

[SuperLuckyLady]

Ooh ooh, now you have me interested. I love my metal Bolt.

But, can you clarify this statement: A protected battery can work on this mod but installation takes a bit more effort than a slightly shorter unprotected IMR battery.

Digging my battery out now...OK, it says 'UltraFire BRC 18650 3000mAh'.....and the small print 're/discharging protection control.' Oh oh. Battery body is 2 and 9/16 inches long, plus the little bump on the end.

So, what kind of heroic efforts will I have to go through to make it fit?

 

[dannoman]

I really wouldn't recommend trying the protected...I was able to insert some smoktech protecteds I have here but its a hard push down and then you have to hold it in tight to get a thread going. I an sure this will wear the threading down after a bit and if you have any sort of arthritis or weakness in your hands its going to be more than rough.

Ooh ooh, now you have me interested. I love my metal Bolt.

But, can you clarify this statement: A protected battery can work on this mod but installation takes a bit more effort than a slightly shorter unprotected IMR battery.

Digging my battery out now...OK, it says 'UltraFire BRC 18650 3000mAh'.....and the small print 're/discharging protection control.' Oh oh. Battery body is 2 and 9/16 inches long, plus the little bump on the end.

So, what kind of heroic efforts will I have to go through to make it fit?

 

[SuperLuckyLady]

I really wouldn't recommend trying the protected...I was able to insert some smoktech protecteds I have here but its a hard push down and then you have to hold it in tight to get a thread going. I an sure this will wear the threading down after a bit and if you have any sort of arthritis or weakness in your hands its going to be more than rough.

Thanks Danno. And yes, I do have arthritis in one of my hands, so not gonna work.

I assume the 18650's you have will fit?

Oops, just saw that they're out of stock.

 

[AG51]

Oops

That's a nice pic of you in your avi Morgans

 

[SuperLuckyLady]

That's a nice pic of you in your avi Morgans

Thank you dear. I like very few pictures of me, but I do like this one. My husband took it in Colorado last week.

 

[badkolo]

i love these units and we will be giving away a pink one in our next contest, they work well and feel great in the hand.

 

[SuperLuckyLady]

Hubby says I gotta get a yellow one 'cos i'm always losing my PV's around the house....

So, will these http://www.gotvapes.com/index.php?main_page=product_info&cPath=104_174&products_id=847

Or these http://www.gotvapes.com/index.php?main_page=product_info&cPath=104_174&products_id=846

fit well?

 

[dannoman]

Morgan out of stock on the smoktech 18650's but we do have the sanyo and the joytech 18650's...

Thanks Danno. And yes, I do have arthritis in one of my hands, so not gonna work.

I assume the 18650's you have will fit?

Oops, just saw that they're out of stock.

 

[SuperLuckyLady]

Morgan out of stock on the smoktech 18650's but we do have the sanyo and the joytech 18650's...

Sheesh, I went to all that trouble of searching and pasting links; should have just waited 8 minutes. LOL.

OK, I'm assuming they fit. One yellow bolt and battery sold to the lady in the navy shirt. Always a pleasure guys.

 

[dannoman]

Actually I had two left in stock I just put up on the smoktech batts...

By the way we have a large stock of Panansonic and efest coming in as well as Xstar chgargers...very soon...

 

[gthompson]

So where do I get this eliquid that matches the color of the bolt?