Hello everyone im new to this forum and want to share my input on the smoktech RSBT hybrid and sub ohming on it.
it has come to my attention that no one out there can seem to go below 1.0 ohms on the RSBT without putting the wick on the inside of the chamber where it doesn't belong.. i just want to put it out to everyone how i have done mine
im running at .8 ohms with 26g wire on mine and still wick it the way its suppose to be (cotton leads running out the channel)
the trick is you have to cut the cotton almost flush with the channel and make sure you don't have too much or too little cotton running through your coil also if you can use rayon or Japanese cotton it helps a lot.
it has come to my attention that no one out there can seem to go below 1.0 ohms on the RSBT without putting the wick on the inside of the chamber where it doesn't belong.. i just want to put it out to everyone how i have done mine
im running at .8 ohms with 26g wire on mine and still wick it the way its suppose to be (cotton leads running out the channel)
the trick is you have to cut the cotton almost flush with the channel and make sure you don't have too much or too little cotton running through your coil also if you can use rayon or Japanese cotton it helps a lot.
