SmokTek Dual Coil Carto Help Please

Status
Not open for further replies.

Kemosabe

Vaping Master
ECF Veteran
Sep 21, 2011
6,147
7,632
Roe Dylin
I bought some dual coils from smoktek because i was hearing great things about dual coils, plus they come with a clear shell so you can roughly see the amount of fluid left.

i just filled one up and popped it on my Bloog battery, but i cant get a draw! its so incredibly stiff barely any vapor comes out.

am i doing something wrong? is there some type of seal i didnt remove, or is there some magical way of screwing this thing on? if i screw it on all the way, its way too tight and zero air come through. if i unscrew it a little, its wobbly, but it still makes a connection but with very little vapor. if i unscrew it more, there is no connection and the carto is about to fall off (but theres plenty of air coming through lol)

what can i do?

heres a link to the product:
Mega XL 1.5 ohm dual coil cartomizer for KR808
 

Kemosabe

Vaping Master
ECF Veteran
Sep 21, 2011
6,147
7,632
Roe Dylin
as it turns out, you need a battery with a slotted center post to use these cartos. the center post on the cartos is not slotted, so you need the slots on your battery. luckily, 1 out of my 4 batteries has slots :)

fyi - bloog mah ratings were reported to be 220, 320, and 420 for the 65, 78, and 102mm batteries respectively.
 

stevejo

Supplier
ECF Veteran
Apr 28, 2009
288
128
Phoenix, AZ
Good information to have, I have never been familiar enough with the Bloog to realize that there were slots in the cartos on some... all my 510 batts have slots

as it turns out, you need a battery with a slotted center post to use these cartos. the center post on the cartos is not slotted, so you need the slots on your battery. luckily, 1 out of my 4 batteries has slots :)

fyi - bloog mah ratings were reported to be 220, 320, and 420 for the 65, 78, and 102mm batteries respectively.
 
Status
Not open for further replies.

Users who are viewing this thread