some magnetic swithes

[rolf]

this mod has the number2 switch.

 

[rolf]

htt
p://i1169.photobucket.com/albums/r512/rolfi6/DSC_0391.jpg
this is number three switch

http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0437.jpg
http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0445.jpg
http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0456.jpg
http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0457.jpg
http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0463.jpg
http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0464.jpg

 

[zanedog]

Looks fantastic!

 

[rolf]

these are two switches w magnets just the flat type w no holes .they are very flat . number two has a hinge made from fiberglass.
number three has no hinge and is floating . also used 40 gage ammo shell for actuator which also houses one of the magnets .
the other magnet is glued on after the switch is build . hold in place with 5 min epoxy till cured. used copper clad circuit board .
the third one is the charm ! will build more of them and use the part of the schell with the firing pin end and no other actuator botton needed . just need to know how long for different mods.all soldering must be done before magnets go in w epoxy. .
they are as flat as the dna 20 w the readout folded on .
have this in mind for a simple to build box .

 

[zanedog]

Genius! Do I see 9mm casings in there!
You can send me a prototype to test hahaa

 

[rolf]

I used the 40 gage shell it fits the 10 mm magnet perfect.
http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0439.jpg

http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0442.jpg

http://i1169.photobucket.com/albums/r512/rolfi6/DSC_0465.jpg