Spare 6ml juice bottle question

[c-fut]

Is the spare 6ml juice bottle supposed to come with an o-ring?

 

[JC Okie]

No, it doesn't....and the cap is not drilled out. But you'll never need to change the top out....just screw the spare bottle part onto the cap w/o-ring that stays on the tube.

 

[c-fut]

Thanks. Would you happen to know the size of the o-ring in case I ever need to get a replacement? Is it the same as the one that comes with the RM2 that goes into the drip well?

 

[Mrs C]

If you look on reosmods site there are 2 o rings listed. The juice bottle one is the thicker of the 2 listed.

Oops maybe not. Look on the accessories page the bottle o rings are listed there.

 

[JC Okie]

I think the two listed are both for the RM2. The size of the one in the bottle is (I think) a size 7 at Lowe's. When you get it, pop it out and take it to Lowes.... Sorry. Not much help. But you won't need to replace it often....maybe never.

Edit: Mrs C is right....look under accessories.

 

[c-fut]

I've read that the o-ring for the 6ml bottle is the same I could use in the drip well and in between the atty and cap to align the coil and air hole. Is that true? If not then what is the size o-ring that goes in the drip well?

 

[JC Okie]

The o-rings for the drip well are listed on the site under rebuildable atomizers. There are two sizes...one a little thicker than the other. I'm not sure all three (2 for drip well and one for bottle cap) are interchangeable. Maybe. I think the bottle cap one is smaller than the ones for the drip well used to adjust the atty.

 

[redeyedancer]

I've read that the o-ring for the 6ml bottle is the same I could use in the drip well and in between the atty and cap to align the coil and air hole. Is that true? If not then what is the size o-ring that goes in the drip well?

I would avoid using the o ring for cap for your atomizer. I would grab one of the 1.5 or 1 mm o rings on my site in the rebuildable section . The problem with the 6 ml bottle o ring is once you get your atomizer in place you will have a hard time removing your atomizer . The 6 ml bottle cap o ring is a little to thick in my opinion