Spare Parts and AW Batteries

[forcedfuel50]

I put up the spare parts (tops, switches, etc) for the Precise 16340 and 18650 on the site, including a heavier switch spring that a couple of people wanted.

Super T Manufacturing, Innovative manufacturer of electronic cigarette products.

I also put up some more AW batteries, including IMR 16340's and IMR 14500's as well as LifePO4's for 6 vaping:

AW Batteries

 

[gatsby]

If you order an extra P18/16 switch is the brass post included or would you have to order one of those separate?
What is the benefit of the heavier spring (this probably needs others to chime in on)?

p.s. Since the subject of spare parts is on the table, how many of us old T1 users would you need to order to get a batch of SS T1 adaptors made?

 

[leroytwohawks]

What has happened with the new button cap for the P10 so it will accept the AW 10440 battery's? I would like to order it and the battery's from you at the same time.

Kevin

 

[YKruss]

What has happened with the new button cap for the P10 so it will accept the AW 10440 battery's? I would like to order it and the battery's from you at the same time.

Kevin

+1, waiting for that too.

Ok, found it on your site - "A switch is being developed and will be offered at cost that will allow the use of the AW 10440 in your Precise. ".
What is a time frame?

 

[pipes1]

Need 2 brass P10 buttons.
Just tell me when to send the money.

 

[forcedfuel50]

The plans are with the machine shop for the longer button, so it's just hurry up and wait:-( I'll let you know asap when we are close

 

[New_World]

very good prices/shipping on batteries.
next time I get some batteries..I'm buying mine from super T.

I may have to pick up the other spring just to have it when I get some batts.

 

[Switched]

I am happy to see a spare parts listing WTG, right direction.

 

[BrockJ]

Very nice... I just ordered a charger and maybe a batt or two on Sunday evening. The screws were shown at that time so I checked to see if it would fit my Super6 and it did "Precisely". Ordered a couple of those..

I'll have to get the other parts while they're in stock and available...

WTG David

 

[grimmer255]

sweet I need some new batteries bad...my 16340 AW high drain did something weird today.... It got really hot really quick off the charger... I think my charger is about shot.... So I may be making an order for the AW 16340's, 14500's and a new charger... there goes the new shorty wide mouth tip i wanted... ah next month then.

 

[forcedfuel50]

If you order an extra P18/16 switch is the brass post included or would you have to order one of those separate?
What is the benefit of the heavier spring (this probably needs others to chime in on)?

p.s. Since the subject of spare parts is on the table, how many of us old T1 users would you need to order to get a batch of SS T1 adaptors made?

The brass 4 prong post is sold seperately. T1 adapters were all made in house here on a manual lathe, so they were never converted for CNC operations, so, unfortunately, it would be cost prohibitive to ever run them as i only sold about 50 T1 units total:-(

 

[atavanhalen]

Nice reasonable prices on the top cap and switch assemblies! On the batts as well, thanks. As soon as I get an extra 60 to 70 bucks its going straight to the brass top cap and switch setup for special occasions. Can I ask what the wait time will be for this stuff, should I just assume it is a couple weeks until you are caught up with the rest of the orders?

 

[BrockJ]

I got my batteries, switch stems and charger Faaaaaaaaaaaaast....

Came today... I was really suprised how quickly it got here....

Nice work david.. Great CS.. That's what people remember..

 

[Drozd]

So... have we seen that there's an even newer AW 18650 battery out 2900mAh
LiNiCoO2 chemistry... a flat top cell

AW's LiIon Batteries Sales Thread *Part 12* - CPFMarketPlace

 

[Switched]

So... have we seen that there's an even newer AW 18650 battery out 2900mAh
LiNiCoO2 chemistry... a flat top cell

AW's LiIon Batteries Sales Thread *Part 12* - CPFMarketPlace

Care to enlighten us on this batt?

 

[forcedfuel50]

Interesting. I'll have to get some in. Maybe you can get 35 hours out of this one switched

 

[Drozd]

Care to enlighten us on this batt?

dunno much about it really (just noticed today that it was added...other than it's 3.6V... and supposedly lighter (because of the chemistry) than Li-Ion... and 2750mAh min to 2900mAh typical...

I guess made by panasonic by the stat sheet that andrew links too http://industrial.panasonic.com/www-data/pdf2/ACI4000/ACI4000CE17.pdf

 

[Switched]

Interesting. I'll have to get some in. Maybe you can get 35 hours out of this one switched

LOL Dave! The 2600mAh suits me fine

dunno much about it really (just noticed today that it was added...other than it's 3.6V... and supposedly lighter (because of the chemistry) than Li-Ion... and 2750mAh min to 2900mAh typical...

I guess made by panasonic by the stat sheet that andrew links too http://industrial.panasonic.com/www-data/pdf2/ACI4000/ACI4000CE17.pdf

Thanks, Panasonic is a reputable mfr AFA batteries are concerned. I guess with time we will know more about the chemistry.