spewing liquid
- Thread starter Jgren
- Start date
- th_trl_thread_readers 0
- Status
I think if the flavor wick isn't placed just right over the coil, and/or a hot spot on the coil, but I'm pretty new. I've been lucky so far rebuilding my cheap coils.
My wife complained about the exact same thing. I got a tweezer (like a pair of tweezers kind of) and raised the plastic cover inside the tube covering the coil up a bit and when the tip was screwed back on it seated flush with the cap and solved the problem. May not be the same cause, but a handy hint if this is the case.
wt
wt
Some folks say to turn the rubber grommet on the chimney over. I haven't tried that myself as I have had no problems with my Evods.
Good Luck and Happy Vaping!!
Good Luck and Happy Vaping!!
When that happened with mine, I changed the head and problem was solved. I put the "bad head" in a glass of hot water and let it soak overnight and then let it dry. When I used it again, I made sure that it was tightened securely into the ring, and it worked good then. I think the first time, I had not tightened it enough, so it leaked into the battery contact.
PS of course I also got all the juice out of the battery contact well.
a couple of things can cause that, one over filling the tank, and two, drawing too hard. (sucking too hard) if you draw too hard you are pulling too much juice over the coil and it can't vaporize it. So after you stop drawing on it the liquid seems to drain down to the top of the battery. My wife has the same problem, I'm always telling her to quit trying to drink a milk shake when she vapes. lol I clean it she eases up and all is well till she starts sucking too hard again
that's from leaking;
bottom coil clearos like the EVOD leak when upright due to gravity; keeping them upside down when not in use avoids leaking;
top coil clearos leak when upside down due to gravity; keeping them upright when not in use avoids leaking;
the coil will run good for a day, maybe 10, depending on usage, but gradually it will leak, as well as probably gunk up with residue;
many people keep a few of these coils and use for a day or few, then replace with a fresh one, and put the used one to soak/clean.
dry burn coil to burn off solid residue; blow it; place/replace top wicks to prevent leaking;
these coils can also be recoiled; there are videos showing how.
Some folks say to turn the rubber grommet on the chimney over. I haven't tried that myself as I have had no problems with my Evods.
Good Luck and Happy Vaping!!
could instead try adding a second one inverted on top of the first; if it fits without tightness, it means the problem was too much space between the flat metal disc of the atomizer and the center tube
Funny how they call it a flavor coil. I always remove mine and it hits so much better.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
the like button is over in the lower right of each post on my screen.
you might have to get up to a certain number in your post count before certain features become available.
Use tapatalk. Press on the post and you get a menu
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- Status
Similar threads
