ss clockwork rda from his open ideas forum

Status
Not open for further replies.

urquidezj

Ultra Member
ECF Veteran
Verified Member
Dec 18, 2010
1,523
1,130
Tucson AZ
So I went ahead and gave it a shot. It turned out ok. Just a first piece so i will work to improve. Take No credit for it since it is clockworks design. Here are pics, my wick making capabilities suck lol.

IMAG0147.jpg


IMAG0145.jpg


IMAG0146.jpg
 

urquidezj

Ultra Member
ECF Veteran
Verified Member
Dec 18, 2010
1,523
1,130
Tucson AZ
It's not a tank per say, looks like one built like one but its just a coil with a wick for direct dripping. Holds up to 15 drops, kanthal wrapped at three wraps, thing hits hard. Hurts the throat and lungs lol. As for vent, it has a small 1/16 hole which is too big imo, I'm gonna have to fiddle with it some more.
 

asdaq

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2010
4,570
1,845
poland, and the brassy lands of google
It's not a tank per say, looks like one built like one but its just a coil with a wick for direct dripping. Holds up to 15 drops, kanthal wrapped at three wraps, thing hits hard. Hurts the throat and lungs lol. As for vent, it has a small 1/16 hole which is too big imo, I'm gonna have to fiddle with it some more.

The path of the airflow is a bit off. It goes in the inlet curves upwards and exits the mouthpiece. The coil is below the inlet and on the other side, so not in the direct path and you aren't getting a good 'harvest' of the vapor. You could try directing the airflow to the coil with a 1/16" tube or 16G SS tube (needle) or raising the coil with some SS standoffs under the screws and turning the tube so the inlet is on the coil side. The 1/16" size isn't necessarily the problem, but you can easily cover part of it later.
 

urquidezj

Ultra Member
ECF Veteran
Verified Member
Dec 18, 2010
1,523
1,130
Tucson AZ
number 3 from mcmaaster carr. i just added a ss wick oxydized and curled, looks like a snake in there. silica doesnt come close in flavor and vapor. i mean i like both, but the flaver, the fact that the mesh wont crap out on me like silica, conserves juice and wicks it better are the wining points on the ss mesh.
 
Status
Not open for further replies.

Users who are viewing this thread