Stick -- tips 'n tricks

[Di]

STICK -- TIPS ‘N TRICKS

Well,
We have been playing with this new toy for a bit now
And we have come up with a few tips ‘n tricks for you -----

When you attempt to fit the atty for the first time – you will find it
Extremely tight, you should put, and unput it a few times, to loosen it up a bit.

1-[FONT="] [/FONT]The atty provided with Stick comes with a plastic mouthpiece[/B][/COLOR]
[COLOR=DarkOrchid][B]This is an empty mouthpiece / no cart – it has a very tight fit so is[/B][/COLOR]
[COLOR=DarkOrchid][B]An excellent way to screw your atty into Stick, [/B][/COLOR]
[COLOR=DarkOrchid][B]when Atty is screwed fully into stick, [/B][/COLOR]
[COLOR=DarkOrchid][B]replace the original empty mouthpiece with a cart.[/B][/COLOR]
[COLOR=DarkOrchid][B] [/B][/COLOR]
[COLOR=DarkOrchid][B]2-[FONT="] [/FONT]Never overfill your cart – soaked but not pooling is best-
This way we try to avoid any leakage into the body of Stick.

3- we recommend that you remove your atty
when not using stick to prevent leakage into the stick body.

4- Store Stick in an upright position when not in use,
Upside down, again to allow drainage of any liquid
From the atty chamber.

5 - Be sure that the USB plug is pooshed very well deep into the body of stick,
it can be very hard and stiff, so some little force may be required to get it
properly inserted fully.
Led should glow Red when properly fully inserted.

 

[kc0cmp]

STICK -- TIPS ‘N TRICKS

Well,
We have been playing with this new toy for a bit now
And we have come up with a few tips ‘n tricks for you -----

When you attempt to fit the atty for the first time – you will find it
Extremely tight, you should put, and unput it a few times, to loosen it up a bit.

1-The atty provided with Stick comes with a plastic mouthpiece
This is an empty mouthpiece / no cart – it has a very tight fit so is
An excellent way to screw your atty into Stick,
when Atty is screwed fully into stick,
replace the original empty mouthpiece with a cart.

2-Never overfill your cart – soaked but not pooling is best-
This way we try to avoid any leakage into the body of Stick.

3- we recommend that you remove your atty
when not using stick to prevent leakage into the stick body.

4- Store Stick in an upright position when not in use,
Upside down, again to allow drainage of any liquid
From the atty chamber.

5 - Be sure that the USB plug is pooshed very well deep into the body of stick,
it can be very hard and stiff, so some little force may be required to get it
properly inserted fully.
Led should glow Red when properly fully inserted.

That's a gizmo i've always wanted to lay hands on but never did. Nice to see the company rep calling the flaws and pointing to the fixes. You don't see that much. Many companies plug their ears and scream "LALALALAICANTHEARYOU!" when anyone has an issue with their product.

Picking up the ball you're thrown and running with it definately beats that proceedure. They're minor problems, and every single pv made has some problem inherent to it by design. As long as the "fixes" and "workarounds" are easy and infrequent, this is not an issue.

If that's all the problems the normal Stick(tm) has, It's probably quite a device.

 

[planetofthevapes]

I just got mine in a couple of hours ago and I LOVE LOVE LOVE LOVE LOVE it...it's been a really long time since I got a hit from a vaping device and I'm stoked! The only thing I worry about is the atomizers I got with it hold the cartridges SO tight that I'm afraid that when I remove them to refill them (at least a couple times an hour...like I said, I'm addicted to my new stick)...I'm afraid I will rip the connector out...it seems pretty well-made though, so hopefully that will never be an issue. Thank you for the fast shipping and awesome customer service...and thank you for my stick, it was very much needed, I have had my kissbox for almost a year (the 801 with a manual switch) and after a year, those two batteries aren't hanging in there for very long and I was very frustrated (but hell, I should just be happy they hung in there for so long!). Thank you again! I look forward to placing another order!