stingray hybrid adapter and troll rda

[big red chuker]

I can not seem to make my troll rda flush. I keep hearing horror stories with the hybrid adapter so I'm nervous to use it. Any suggestions?

 

[The Cloud Minder]

Not being familiar with the troll rda, I gotta ask : Does it have an adjustable pin (not floating)? If it doesn't don't use it with a hybrid.

 

[hurricanegirl100]

Hey, Big Red! I had the same question - see this thread

http://www.e-cigarette-forum.com/forum/mechmods/664398-hybrid-adapters.html

 

[Sgt.Rock]

If the center pin does not protrude from the bottom of the atomizer it's not safe to use..that center pin needs to protrude beyond the threaded sleeve to make contact with the battery terminal without the surrounding sleeve also making contact (creates a dead short)

Also, if the atomizer has an adjustable center pin BE SURE when it's turned out far enough to use that it is in fact stable there and does not wobble---or again..dead short.

 

[big red chuker]

My biggest concern is how do I make the tube mod flush at the seem and where the rda attaches to the mod

 

[roxynoodle]

The Stingray X has a floating pin in the top cap. Take the switch off, or at least loosen it. Screw your atty into the top cap first until its flush. Then put in the battery, and finally the switch. I've never had an atty not sit flush, not even the magma.

 

[Susan~S]

Hybrid Top Caps & Battery Failure

 

[Firestorm]

I don't own a Troll RDA, but the product page on the following website indicates that it has an adjustable silver-plated 510 connector (that you could presumably use to extend the center pin well beyond the 510 threading for use with a hybrid adapter): Troll RDA by Wotofo | Vape Affliction

 

[cinetrope]

The Stingray X has a floating pin in the top cap. Take the switch off, or at least loosen it. Screw your atty into the top cap first until its flush. Then put in the battery, and finally the switch. I've never had an atty not sit flush, not even the magma.

It really is this simple.

 

[roxynoodle]

It really is this simple.

It is, which is why I like them

 

[LilWhiteClouder]

If the center pin does not protrude from the bottom of the atomizer it's not safe to use..that center pin needs to protrude beyond the threaded sleeve to make contact with the battery terminal without the surrounding sleeve also making contact (creates a dead short)

Also, if the atomizer has an adjustable center pin BE SURE when it's turned out far enough to use that it is in fact stable there and does not wobble---or again..dead short.

Exactly the info. I was looking for, thanks!! I just bought the Dragon Zodiac "El Sigilo", SS Torched Edition, by Wu Tang House of Mods and was trying to grasp the concept of the hybrid connection. I was thinking all along that there would be a dead short if the flush +pin to the atty and the threads around it both made contact with the battery. Appreciate the info. Love E-Cig Forum!!