stormy tank

[tallkorean62]

hello guys. i just received my tank from cludsvapor.
this is the link. The Storm Clear Mini! An E2 V4 510 Tank Mod 2.8 ohm

and i couldn't find instructino video for how much to fill up the juice.
this is what i figured out after wasted 10ml of juice.
i guess i need to fill up until white thing(top of e2) because i noticed that if i fill above e2 then it is licking. and i guess i need to push my drip tip all the way until it touches white thing(e2).
is this right?

 

[Bigbuyer]

Glad you got your Storm. Fill to just bellow the white ceramic cup.

 

[tallkorean62]

so i just it up until white ceramic cup and push black thing with my drip tip all the way down until it covers white ceramic cup. right?

 

[CloudBurst]

Yup, that's it. If you overfill it, it will leak down the air tube, so just below the ceramic cup will do it.

 

[daniel5383]

wish i would have seen this before i just wasted some juice...here is my first impression on this thing. The flavor and throat hit this thing gives me is awesome with a 3.2 on a 6volt silver bullet. That is where the awesomeness stops though...nothing against stormy because this does what it is supposed to do. I just was expecting the exact same thing as the MAP tank mod. After watching the review from Chris, I was really excited to try these...He is able to turn his MAP tank mod upside down and shake hard and nothing comes out...It is obvious with this mod, it is not possible to turn it upside down as there is a big hole where juice will obviously flow out...That was one of the reasons I was getting this thing was for the convenience of being able to just do whatever i wanted with it and have it not leak...not just leave it upright all day...what it is made out of looks very inferior to the map tank mod too. the end of my tube where you put the drip tip is cut a little off so it looks pretty tacky and while my drip tip fits in nicely, its crooked and makes my piece look sloppy now...i knew i wouldnt get the exact same thing as the map tank mod for 12.99 instead of 29.99 but now i want to sell these and just get a map tank mod...

 

[nickf41680]

Actually IMO the stormy mod is just as leakproof as the MAP tank I have both and both are sealed the sane way on top of the cup the MAP tank just holds more juice. With the middle ring installed the gap is sealed around the cup and shouldn't let fluid pass through...

Sent from somewhere in my daily travels....

 

[floridamale]

If it's set up right there should be no leaking the top piece seals against the fill ring which covers the cermic cup just like on the MAP.

 

[tallkorean62]

i am not complaining about stormy tank but just writting short review for one day vaping with stormy tank.
when you let it sit your stormy tank for while it leak through air way. so this morning i had to clean up juice like which will happen when i make more drops into atty than i am supposed to and also little juice is leaking from the bottom b/c there is cap between bottom of e2(metal) and tube. i had to clean bottom of stomry.
i will say map tank will be a better choice, quality of stormy is not that great. i know it's only 12.99 but it's still money. i want to get 100% leak free so i hope map tank is the right choice for me.

 

[daniel5383]

disregard my earlier message lol...i feel like an idiot...I just wasnt pushing the o ring all the way down...

 

[webking]

Mine leak also.

 

[throbinskin]

Storm tank instructions: http://www.e-cigarette-forum.com/forum/clouds-vapor/149233-storm-tank-instructions.html

This is a good start on set up

 

[CloudBurst]

If you over fill it will leak through the air tube. Ive never had one leak from the bottom of the tube but if it seems to be push the cart up through the top of the tube and reseat the tube back over the top of the cart. Go almost to the bottom of the small tube over the cart. Hope this help.

 

[CloudBurst]

Also, the black mouthpiece is designed to cover the cup, make sure its over it or it will definitely leak into the air tube or out the mouthpiece.

 

[robson]

I recieved the storm tank last thursday and not had any leaking issue's at all and it still vaping like a champ.
Just want to know will the clearomisers fit this?

 

[floridamale]

I recieved the storm tank last thursday and not had any leaking issue's at all and it still vaping like a champ.
Just want to know will the clearomisers fit this?

Storminyte talked about that in a different thread and determined they will not work in the storm tank mod. You will need to use the regular XL/E2-V4's and cut them or buy them pre cut

 

[hairball]

I tried a clearomizer in both the MAP and stormi's mod, nope won't work. The base of the clearomizer is smaller than the steel tubed ones. It jiggles around and won't stay put in either mod.

 

[ScottinSoCal]

After watching the review from Chris, I was really excited to try these...He is able to turn his MAP tank mod upside down and shake hard and nothing comes out...It is obvious with this mod, it is not possible to turn it upside down as there is a big hole where juice will obviously flow out...

Then I would say you have it put together wrong. I have one of these, and it's been bouncing around inside my supplies case since last night. Upside down, on its side, all over the place. I didn't leak a drop. The last precious bit of my watermelon juice (until I get an order - hopefully tomorrow) is safe, waiting for me to vape it.

 

[ScottinSoCal]

OK, I'm gonna have to counter some of these reviews....

I've had it for a few days, and it hasn't leaked a drop. The vapor and flavor are excellent, I just wish it held more.

Yes, it was a little fiddly to put together, and the directions make perfect sense when you know how it's supposed to go together - not quite as much when you're holding three parts without a clue how they fit together. I did eventually figure it out, and after I had that ah-hah! moment, I was good.

I tried making a syringe mod myself, and it worked, but I decided the $13 was well worth it for someone else to have the hassle of getting everything together, and I'd just enjoy the end product. Wonderful, inexpensive little mod that does exactly what it advertises.

 

[CloudBurst]

Thanks, Scott, I think it fits the ego or Rive perfect!

 

[ScottinSoCal]

Thanks, Scott, I think it fits the ego or Rive perfect!

It's not too shabby on a ProVari, either.