Super-T1 6v extension sleeve + video

[forcedfuel50]

I've received a lot of requests for a 6v extension sleeve for the Super-T1. I will have the extension sleeve available on my website shortly, and I hope to get them out just shortly after my first pre-buy batch is completed. Here is the video- Enjoy!

YouTube - Super T-1 6v extension sleeve

Here's my first video in case you haven't seen it-


YouTube - Super T Manufacturing T1 Personal Vaporizer 0001

 

[forcedfuel50]

I should also post a warning regarding 6 Volt applications: 6 volts can be an atomizer eater. The added voltage makes the heating element run hotter. With caution, one can extend the life of their atomizer, but as a general rule, it will burn through atomizers much quicker then the normal 3.7 volts for which they were designed.

It is akin to taking your 115 volt light bulb and running 200 volts through it; it will be brighter, but it will also burn out much quicker. I recommend using the 6 volt as an occasional addition to your 3.7 volt vaping routine.

 

[NY JETS]

Not gonna lie, that is pretty badass FF!

 

[youtubecommercial]

Do you have a Super T1 with the 801 adapter that has the 6 volt extension sleeve included? I don't need the battery's, charger or atty. I also would like to get the 901 and 510 adapters but looks like for every thing it will run into a lot of $$$ I can get those later.

 

[forcedfuel50]

Yeah, it does add up quick. The only consolation i can add is that i literally have 2-4 times the machining into it than the other models available. Once you you see it in person, you realize how stunning it is and the attention to detail really shows. The Super-T1 with 801 is 119.99 (which is $10 off for the prebuy) and the 6v sleeve is 29.99. The 6v sleeve is only an option. I don't know if you've been to the website yet, but it is Super T Manufacturing

Thanks Again!
David

 

[TnA]

David, that 6volt sleeve looks very impressive in the video clip....it appears to be a seamless addition to the PV that would be hard to detect to the casual observer!

I'm curious about the addition of a second battery in regards to the awesome safety feature you have in your vents. Since I understand the Super T is very tight in it's tolerances to keep it as narrow as possible, will the vent holes still allow the additional battery to safely vent out gas?

Otherwise, one suggestion I have would be to consider adding similar vent holes in the extension sleeve to insure the second battery has the same exit capability.

Definitely looking forward to receiving my SuperT. I swore I'd never buy anyone's battery mods since I can make my own....but I had to make an exception with yours!

 

[forcedfuel50]

Yes, it is tight, but I feel there is still adequate space to allow venting (at least an equal volume to the vent holes capacity). Plus, the upper CR2 actually extends halfway down into the larger chamber that the normal 16340 sits in giving it plenty of space around it. Also, due to the cr2's short length, they are still in fairly close proximity to the vent holes. When using the normal 16340 battery, you have three safety features on the Super-T1: Venting, Locking Button and Protected batteries. When using the two Cr2's for 6v (which are unavailable in a protected version) you have two safety features: Locking Button and Vent holes.

 

[youtubecommercial]

Thank you! I will save up my money then and get one

 

[forcedfuel50]

Stock update: I have 3 units left on the first production run that should finish up production in about a week and a few odd days.
I do plan to extend the $10.00 off promotional price on the next run. I would estimate the next run should be completed in about 3 weeks.
You can check back here for updates and I can also be contacted at supertmanufacturing@yahoo.com and the website also has a contact form you can fill out. Thanks again for all the support and if you have any questions, feel free to ask!

David

 

[mamu]

David - I ordered an 801 Super T and a 510 Super T with 2 extension sleeves.

When do you think shipping will be??

 

[forcedfuel50]

David - I ordered an 801 Super T and a 510 Super T with 2 extension sleeves.

When do you think shipping will be??

Mamu,

Your order is on the original run, so it should be about a week and a half. I originally estimated the completetion date at 2 weeks and that was last thursday and it looks like I am still approximately on that time line. Thanks again Mamu and if you have any further questions, feel free to ask!

David

 

[mamu]

Mamu,

Your order is on the original run, so it should be about a week and a half. I originally estimated the completetion date at 2 weeks and that was last thursday and it looks like I am still approximately on that time line. Thanks again Mamu and if you have any further questions, feel free to ask!

David

Cool

A good friend recommended the Super T to me after she bought one. So we're both now waiting for delivery.

Just love it that your mom is vaping on the video - that's cool too!

 

[forcedfuel50]

Thanks Mamu, my mom got a kick out of making the video!

 

[forcedfuel50]

UPDATE: Only one (1) Super-T1 is left on the first batch preorder (any adapter/atomizer type as i machine that last).

After this last one is sold, I'll still leave the ordering up for the second production run and still honor the $10 off promotion, however, be aware that you will be on the second production run with a completion date of approximately three weeks from today. Waiting can be fun when it's something special you're looking forward to, kind of like Christmas;-)
Thanks again!

David

 

[Zofryer]

I *think* my order was the last of the initial production run. I just ordered an 801 body, and 6v sleeve going to Ashburn, VA.

 

[forcedfuel50]

I *think* my order was the last of the initial production run. I just ordered an 801 body, and 6v sleeve going to Ashburn, VA.

Thanks for the order Zofryer! I actually posted that right away when I saw your order come in (i guess i'm johnny on the spot today), so there is still one left!

David

 

[forcedfuel50]

UPDATE: The last one is sold out of this first production run. Any orders hereafter will now be grouped with the second production run, which will be completed in approximately 3 weeks. I will continue to accept orders for those wishing to get in on this second production run (which i am going to limit to 25 units) but, please be aware this second production run will take approximately three weeks. All though I am hopeful it may go quicker, I have to be realistic given the multi-stage machining each unit goes through. Thank you again for the support, i truly appreciate it.

David

 

[Judge Mental]

I'm really looking forward to getting this device, Dave! Shouldn't be long now, huh?

 

[forcedfuel50]

I'm really looking forward to getting this device, Dave! Shouldn't be long now, huh?

Finished the bodies today. Now I'm onto the switches and lastly the adapters. Are you getting excited yet?! I'm having fun making them!

David

 

[iliteo]

Hi David.. u have PM