I built my first box mod today with the sx350 from varitube and their hana clone kit. Everything works great except the usb charger. the light turns red but the battery voltage never goes up. its been on charge for 3-4 hours and still at 3.9 volts where I started. Am I jumping the gun here on charge speed or have I missed something?
sx350 usb charging
- Thread starter gomjabbar
- Start date
- th_trl_thread_readers 0
- Status
still no charge after on all night. Found this and am wondering if I need to disconnect a black wire and connect to battery?
White is your power out ... connection to center pin of your connector
Red ... Battery + (positive) connection
Black ... Battery - (negative) connection
There needs to be a final connection for return path which is to the case or outside of your connector to your battery negative
White is your power out ... connection to center pin of your connector
Red ... Battery + (positive) connection
Black ... Battery - (negative) connection
There needs to be a final connection for return path which is to the case or outside of your connector to your battery negative
you answered before i could, there's no specific display when on charge on this chip, but yeah, yuou should see the voltage go up and the led turns green when fully charged
- Status
Similar threads
