T3S BCC + eGo = weak vapor production& harsh hit?

[sbc83]

Are the holes on the base at about this height?

 

[ccubed]

It's 70 pg/30 vg according to the vender. The bottle is not labeled.

It's harsh, but not burnt tasting.

I just loosened the part between the battery & tank (the part that has holes?) & I seem to have more vapor & a more airy draw.



Could the juice leak this way? Did we fix it?

Hope that is the fix. I screw my clearo on until it just makes contact and no tighter. The airflow through the holes in the base of the MT3S isn't always enough. Which may be why there are 4 little cut-outs on the battery where the clearo base screws onto the battery. If it is too tight, then no airflow through those 4 little cut-outs. At least that is what I have found. When I scew the clearo onto my battery, it is tight enough to make good contact, but loose enough that I can wiggle the clearo a bit when it is on the battery.

Glad you are getting vapor. Remember, slowwwww draws so the juice has time to wick. When I remember to draw long and slow, I get really good flavor. Hope you find it the same Ind1. Namaste.

 

[Ind1]

There's a slight gap

 

[Ind1]

Are the holes on the base at about this height?

No, they're more centered...

 

[Ind1]

Hope that is the fix. I screw my clearo on until it just makes contact and no tighter. The airflow through the holes in the base of the MT3S isn't always enough. Which may be why there are 4 little cut-outs on the battery where the clearo base screws onto the battery. If it is too tight, then no airflow through those 4 little cut-outs. At least that is what I have found. When I scew the clearo onto my battery, it is tight enough to make good contact, but loose enough that I can wiggle the clearo a bit when it is on the battery.

Glad you are getting vapor. Remember, slowwwww draws so the juice has time to wick. When I remember to draw long and slow, I get really good flavor. Hope you find it the same Ind1. Namaste.

It was on so tight, I had to ask my hubby to free it.

I screwed it on as you said....there is contact, but I didn't tighten further once contact was made. The flavor is amazing. The vapor has improved, but still not as thick as what I can get on my sister's.

Overall, I'm satisfied now.

Thank you all so much for walking me through this.

 

[Palantir1120]

Some of the bases have to holes drilled a little lower then others. I found that a joye ego draws hard and cape isnt as good. I just unscrewed tank 1/4 turn and it performs much better. I have another ego battery that is generic and has less threads then the joye battery and it draws great.

Sent from my SPH-D710VMUB using Tapatalk

 

[Palantir1120]

If you compare the threads on each battery with the one that gives the desired vape you will prolly see that the other batteries have more (higher) threads.

Sent from my SPH-D710VMUB using Tapatalk

 

[Redmax]

I found this interesting since I also use the T3S and eGo Ts and an eGo C Twist. I haven't your problems yet, but the thread has added to my education. Thanks for posting and all those with input.