Taifun GT II ( Great innovation Huge improvement )

[crazelee]

1. Glass tank in a stainless steel sleeve.
(Specially ground glass sleeves for the Typhoon II GT customized)

2. The Liquid setting, closed, open sleeve is adjustable with the evaporator compartment lid,
by increasing or decreasing the indentations in height.

3. Air supply adjustable up to a maximum opening of 3 mm?
The air supply from outside is from 2 sides, with a different number of air holes.
When fully open, the entire air duct is 3 mm, therefore no sham.
Any whistling noises are not present, only normal Luftzuggeräusche.
A contained in Aquatube Teflon sleeve is used for area reduction of the air tube if necessary
in the evaporation chamber, possibly in order to achieve a lower air flow width.

4. Replacement seals are included

Optional / accessories:
- XS glass tank set
- Stainless steel sleeve as used instead of glass sleeve
- Evaporator chamber sleeve with widened indentations for even higher Liquidnachfluß

In principle one can use with the GT II almost all types of windings.
When complete opening of the air supply and corresponding winding is achieved
the result of a Tröpflers, just with a tank system.

Price: 139, - €

Source: Wow... TAIFUN GT 2 ( Great innovation Huge improvement ): FastTech Forums

 

[brickfollett]

aaaaaaaaand they're sold out. I was able to score one luckily. Very very excited

 

[Malefilipinonurse]

aaaaaaaaand they're sold out. I was able to score one luckily. Very very excited

yeah man! Scored one as well...can't wait!

 

[Circa Survivor]

Looks nice. My original Taifun GT leaked like a ...., so hopefully I can get my hands on one of these.

 

[brickfollett]

This thread needs more attention! Everybody is over posting in the original GT discussion

 

[Malefilipinonurse]

Boom!

 

[TopCatJimi]

I bought a taifun gt 2, 1:1 clone on ebay from the seller (owv12) for under $30 .. i since my 1st bought and received a 2nd .. and now have a 3rd on the way .. awesome shipping .. got it in 3 days

 

[AnsonJames]

What are they like - good clones?

 

[dwcraig1]

Just a bit cloudy today

 

[morpheusneo]

Boom!

What tank is that on the top picture? Is that one of the Hysterics? I have the dome coming for mine but said they were sold out of all the other versions but working on a V3.

 

[Mart T]

Thinking of getting one of these for my wife, she loves her kayfun lite plus so went and bought her a lemo drop and she finds the draw way too airy, the gt 2 adjustable airflow looks great anyone have a lemo and can compare?

 

[350ZMO]

Thinking of getting one of these for my wife, she loves her kayfun lite plus so went and bought her a lemo drop and she finds the draw way too airy, the gt 2 adjustable airflow looks great anyone have a lemo and can compare?

I have a Lemo not a drop. Both have an AFC in the base. I can dial the Lemo down to be the same as the GT-T V2. Wide open the Lemo is a bit more unrestrictive draw.

I opted for the helmet look.



With 100VG it has a nasty habit of building up a huge air bubble around the wick port preventing it from wicking correctly. I plan to fix that though. Although turning the AFC takes some force, you can pull it off the base. At least it doesn't droop down like the Squape R. I'm enjoying it when it doesn't bubble lock.

 

[dwcraig1]

With 100VG it has a nasty habit of building up a huge air bubble around the wick port preventing it from wicking correctly. I plan to fix that though. Although turning the AFC takes some force, you can pull it off the base. At least it doesn't droop down like the Squape R. I'm enjoying it when it doesn't bubble lock.

I'm thinking your tank liners are clones, if that's the case then they may be 1.5 mm thick as opposed to the original's 1 mm thick. I have 5 of these coming, https://www.fasttech.com/p/2079900, they are about 1.2 mm thick (I think). They should have left China before the holiday according to tracking. I have both thicknesses of tank liners, a pretty big difference between them at the chamber walls.
These are plastic liners, for glass Ibtanked 1 mm , a bit pricey though.

Edit: I just took another look at the liners that I linked to, maybe they are 1.5 mm also, just what I need, 5 more of those.
Here it the one I bought with the thinner liner that I'm trying to get replacement tanks for: https://www.fasttech.com/p/2080500
If all goes well I'll have them in about a week and will post as to their wall thickness.
I'm putting this here so I can find it: 21 mm OD x 30.25 mm x 1 mm ( in case I go with IBTanked )

 

[350ZMO]

Yep until then this works, bubbles be gone, vaping better than the KFV4. Sustaining 20W with a different build can probably go higher.

When I get really bored some day I'll clean it up and buff it.

 

[dwcraig1]

I'll have my FT tank sleeves in a couple more days and will post as to whether they are thick or thin.

 

[dwcraig1]

I'm thinking your tank liners are clones, if that's the case then they may be 1.5 mm thick as opposed to the original's 1 mm thick. I have 5 of these coming, https://www.fasttech.com/p/2079900, they are about 1.2 mm thick (I think). They should have left China before the holiday according to tracking. I have both thicknesses of tank liners, a pretty big difference between them at the chamber walls.
These are plastic liners, for glass Ibtanked 1 mm , a bit pricey though.

Edit: I just took another look at the liners that I linked to, maybe they are 1.5 mm also, just what I need, 5 more of those.
Here it the one I bought with the thinner liner that I'm trying to get replacement tanks for: https://www.fasttech.com/p/2080500
If all goes well I'll have them in about a week and will post as to their wall thickness.
I'm putting this here so I can find it: 21 mm OD x 30.25 mm x 1 mm ( in case I go with IBTanked )

Well I got them today, I lose, they are 1.5 mm thick. Same as what I have except these are acrylic and my other ones are PC.

 

[350ZMO]

maybe a 19mm coin tube?

 

[cmantis]

I was so proud of myself building my GTII which just arrived. Came back inside and it dumped the tank of juice out all over my mod. What could I have done wrong? I am assuming it filled the deck and drained down the air tube as it seems to have come out of the air holes. I knew I shouldn't have filled the tank as its now empty before I could even enjoy

 

[350ZMO]

Check O-rings and wicking?

 

[350ZMO]

maybe a 19mm coin tube?

Nope too big.