Target PM80 by vaporesso - the first 80w Sub-Ohm Pod mod: Target PM80 » Vaporesso
The Vaporesso Target PM80 Pod / Mod / Aio Kit is the first ever pod / mod system to be able to deliver a maximum power of 80w, last year we saw a large production peak of similar Pod systems, but they were largely intended in the vaping in restricted DL and in a lower percentage for the MTL vaping, Vaporesso has identified this gap in the market and has produced a Pod / Mod DL without restrictions.
The package, on the front shows the Pod / Mod, on which the writing "A SUB-OHM POD MOD" heads further down and in small we read the name of this new product (Vaporesso Target PM80), in the rear area they are shown first the specifications then the content, the holographic control for the authenticity of the product, the batch number, a bar code and the inevitable logos & brands.
Later it is remembered that the product reaches 80W of maximum power, makes use of the new mesh / coil called GTX, the supplied chip is the AXON (simplified), finally the product for charging uses the 2A Fast Charging technology.
Once the package is opened we can see what the new PM80 looks like to us, everything is well arranged inside the box.
Package contents:
1 PM80 Target Box
2 Pod Target PM80 4ML
1 GTX 0.2Ω MESH COIL
1 GTX 0.3Ω MESH COIL
1 USB cable
1 User manual
Features and dimensions:
Dimensions in mm: 102 x 24.8 x 33.4
Weight: 107gr
Screen: 0.96 inches
Battery: 2000 mAh
Charging current: 2A - Micro USB
Tank capacity: 4 ml
Coil GTX 0.2ohm mesh from 45W to 60W
Coil GTX 0.3ohm mesh from 32W to 45W
Colors:
The front view of the PM80 highlights integrated in the 0.96 "TFT LCD screen, a rectangular Fire switch arranged vertically, at the bottom always arranged vertically we find the Up / Down keys.
The side opposite the front houses the plastic insert very pleasant to the touch and the Vaporesso logo at the bottom.
On the side, the shiny metal part creates a nice contrast with the colored insert, one of the two opposing slots for air-flow can be seen at the top.
The other side reflects the previous one, at the bottom it houses the 2A Fast Charging micro usb charging socket
The housing for the pods on the battery offers a good fit, in addition to the two magnets you can also see the 2 contact pins.
The lower part of the device bears the C E mark, the disposal logo, a series of vent holes arranged in two parallel rows, the indication of origin of the product and the wording 2.000mAh which indicates the capacity of the integrated battery.
The Vaporesso Target PM80 Pod / Mod / Aio Kit is the first ever pod / mod system to be able to deliver a maximum power of 80w, last year we saw a large production peak of similar Pod systems, but they were largely intended in the vaping in restricted DL and in a lower percentage for the MTL vaping, Vaporesso has identified this gap in the market and has produced a Pod / Mod DL without restrictions.
The package, on the front shows the Pod / Mod, on which the writing "A SUB-OHM POD MOD" heads further down and in small we read the name of this new product (Vaporesso Target PM80), in the rear area they are shown first the specifications then the content, the holographic control for the authenticity of the product, the batch number, a bar code and the inevitable logos & brands.
Later it is remembered that the product reaches 80W of maximum power, makes use of the new mesh / coil called GTX, the supplied chip is the AXON (simplified), finally the product for charging uses the 2A Fast Charging technology.
Once the package is opened we can see what the new PM80 looks like to us, everything is well arranged inside the box.
Package contents:
1 PM80 Target Box
2 Pod Target PM80 4ML
1 GTX 0.2Ω MESH COIL
1 GTX 0.3Ω MESH COIL
1 USB cable
1 User manual
Features and dimensions:
Dimensions in mm: 102 x 24.8 x 33.4
Weight: 107gr
Screen: 0.96 inches
Battery: 2000 mAh
Charging current: 2A - Micro USB
Tank capacity: 4 ml
Coil GTX 0.2ohm mesh from 45W to 60W
Coil GTX 0.3ohm mesh from 32W to 45W
Colors:
The front view of the PM80 highlights integrated in the 0.96 "TFT LCD screen, a rectangular Fire switch arranged vertically, at the bottom always arranged vertically we find the Up / Down keys.
The side opposite the front houses the plastic insert very pleasant to the touch and the Vaporesso logo at the bottom.
On the side, the shiny metal part creates a nice contrast with the colored insert, one of the two opposing slots for air-flow can be seen at the top.
The other side reflects the previous one, at the bottom it houses the 2A Fast Charging micro usb charging socket
The housing for the pods on the battery offers a good fit, in addition to the two magnets you can also see the 2 contact pins.
The lower part of the device bears the C E mark, the disposal logo, a series of vent holes arranged in two parallel rows, the indication of origin of the product and the wording 2.000mAh which indicates the capacity of the integrated battery.