Tarot Pro 160 W TC

[Savvas123]

Hello guys, and Merry Xmas! I recently got my hands on a Tarot Pro, but it seems that you cant change the wattage in TC Mode.(Nickel)

Even at 600F, the maximum wattage set by the mod is 40 and then drops down to 35. Is there really no way to change this? On my cuboid I use 49-50 watts on TC, and I cant really do 35 now.

Any ideas on how to change the wattage? I cant seem to find it anywhere online.
I would be really dissapointed to find out that you cant.
Thanks!

 

[AtmizrOpin]

doesn't the tarot have that variable wattage curve you adjust in .5 second increments in TC or wattage? click "mode button" 3 times select "CCW" and adjust your ramp up. maybe try that. see if setting the CCW carries over to TC mode.

 

[Savvas123]

doesn't the tarot have that variable wattage curve you adjust in .5 second increments in TC or wattage? click "mode button" 3 times select "CCW" and adjust your ramp up. maybe try that. see if setting the CCW carries over to TC mode.

Yes it does, but you have to be in wattage mode. As soon as you enter tc the CCW becomes CCT and you can only adjust the temperature itself, not how fast it ramps up(I.e: wattage).

 

[AtmizrOpin]

i know it's a separate setting. that's what i was asking, if you set the ramp up in (CCW) in wattage mode, will your custom wattage curve carry over to TC even though it's not an option in TC? no? for ex. set 1 second's worth to 80w in the wattage curve, switch over to TC and take note of the wattage applied to your TC coil. worth a shot, at least.
i won't buy mods unless i have control over the wattage in TC. 40 watts in TC ain't enough to much with these days. the coils that are being built today have a lot of mass to heat up.

 

[Savvas123]

It doesnt look like it mate.. I tried that but nothing.. I guess I'll have to change my coils.

 

[AtmizrOpin]

FYI, Fasttech has the Hcigar Vt167 for $76.