terminology 501.801,306,901,

[olscratchy]

need help with terminology of atomizers
dont understand what the differences are
just got an old goat, vv, bottom feed that uses 2 14500 batteries & would like to know what type of atomizers I should use,
also always want to learn more
Thanks

 

[ElConquistador]

510 is pretty much the standard today. Never heard of your mod, but if I was a betting man, I'd assume it is a 510. It is a female thread on the mod, male thread on the atomizer.

 

[ElConquistador]

Oh, if it's a bottom feed, you are going to have to find a bottom fed atomizer, which can be more of a challenge. Reos mods sells them, and there's a member her who converts atomizers to bottom feed... search for Catfish Atty

 

[ElConquistador]

Maybe some help here:

http://oldgoatmods.forumotion.com/t6-old-goat-mod-gallery

 

[DreamWithin]

The difference is the threading on the atomizer connection.

510 and 306 are the same threading, just slightly different atomizer design (both will work on any 510 mod)
901 is a little larger diameter threading and has a female thread on the atomizer and male thread on the mod (the opposite of the way the 510 is)
801 is much like the 901, but even larger in diameter

510 is the standard nowadays, the others are not common anymore, and I'd be willing to bet that's what you Old Goat has on it. If you post a pic of it we can tell you for sure.

Any normal atomizer should work just fine. There are some 510 atomizers available that have a sealed center post, which won't work, but these are less common than the un-sealed variety so as long as the product listing doesn't mention "sealed" you should be fine ordering

 

[DreamWithin]

Oh, if it's a bottom feed, you are going to have to find a bottom fed atomizer, which can be more of a challenge. Reos mods sells them, and there's a member her who converts atomizers to bottom feed... search for Catfish Atty

ElConquistador is referring to bottom-fed rebuildable atomizers here, just so you are aware.

 

[olscratchy]

The difference is the threading on the atomizer connection.

510 and 306 are the same threading, just slightly different atomizer design (both will work on any 510 mod)
901 is a little larger diameter threading and has a female thread on the atomizer and male thread on the mod (the opposite of the way the 510 is)
801 is much like the 901, but even larger in diameter

510 is the standard nowadays, the others are not common anymore, and I'd be willing to bet that's what you Old Goat has on it. If you post a pic of it we can tell you for sure.

Any normal atomizer should work just fine. There are some 510 atomizers available that have a sealed center post, which won't work, but these are less common than the un-sealed variety so as long as the product listing doesn't mention "sealed" you should be fine ordering

Here are a few pics, any info on this model will be greatly appreciated


the adapter that came with my eleaf iStick is to small in diameter, I assume that is a 510? just tried it for size comparison

 

[ElConquistador]

I'm clearly out of my league here, so take what I say with a grain of salt! That said, I can't imagine the adapter for the istick being anything but a 510 thread. If it won't fit, I don't have a clue.

 

[mrfixit]

This my help out check this link out the info on the old goat is towards the bottom of the page.

http://www.ecigarette-mods.com/type/battery-box/page/2/

One thing you cold do is if you have a vape shop nearby you could go there and try some of the atties to see what fits. The info says the old goats are all 510's looks like you have a 5v version.