~The Billet BoX~

[Kataphraktos]

Thanks for your replies I'll go check out the diver thread now and I'll look forward to reading the billet bridge feedback once everyone receives them.
The dv2 is working good sometimes but after hours of working perfect then starts flooding very annoying but sure I'll find my answer there

Sounds like you might be using the default v2 pin that comes with the v2 Diver. In the BB, switching out to the old v1 pin that came with the v1 Diver addresses this, by reducing airflow restriction. More of the v1 pins should be available on the website in the next couple of days.

 

[Katdarling]

Your welcome. Kat hated them obviously. But I adore them in my u-dcts.

Autumn, I didn't hate them, nor do I hate any vape gear, but they weren't my cuppa coffee. I'm pleased to hear that they work for you and you enjoy them. I simply prefer an IKV karto, or a good old stock Boge (when I can find them), tanked.

 

[Hrathor]

Argh. If I can't get this diver to work more consistently, I'm going to have to make a trip to the classies :/
I have so little wick it should be flooded and I'm somehow running it dry. Maybe the Boba's is just too thick and I can't get enough vacuum? I have 3 ohm coil, organic cotton, loose with both ports open. Right now it's filled just past the holes. I'm going to try a full fill and see what happens.

 

[Kataphraktos]

Argh. If I can't get this diver to work more consistently, I'm going to have to make a trip to the classies :/
I have so little wick it should be flooded and I'm somehow running it dry. Maybe the Boba's is just too thick and I can't get enough vacuum? I have 3 ohm coil, organic cotton, loose with both ports open. Right now it's filled just past the holes. I'm going to try a full fill and see what happens.

Drunk_J was getting dry hits due to insufficient cotton. Try going the other way. Check my recent post in the Diver thread including pictures to see an example of how much cotton ball I use. I vaped through over a tank on my BB with this exact wick shown in those pictures, every draw was perfect. And I use Ahlusion juices at max VG, which have a similar viscosity to Boba's.

 

[xtreme101]

Kata is referring to the following post in the Diver thread.

http://www.e-cigarette-forum.com/forum/showthread.php?p=12349309

 

[Hrathor]

I was too stubborn to ask for a link, and search was leading me all over the place...mostly unrelated to the BB or Diver, haha.
So, that looks pretty much like what I started with. Except your coils look a lot bigger on the D'. What gauge wire and and what size is the wrap? Looks to be about 1/8 drill bit. Ohh how I hate NR builds.

 

[Phatdanuk]

I was just thinking the same thing about the size of the coil I'll try making it bigger and order a v1 pin when there in stock and hopefully no more gurgling.
Thanks xtreame101 for the link

 

[Kataphraktos]

I was too stubborn to ask for a link, and search was leading me all over the place...mostly unrelated to the BB or Diver, haha.
So, that looks pretty much like what I started with. Except your coils look a lot bigger on the D'. What gauge wire and and what size is the wrap? Looks to be about 1/8 drill bit. Ohh how I hate NR builds.

I build all my coils using either 2mm or 2.4mm screwdrivers. That's 5/64ths and 3/32nds. I use 30g R and NR.

These rebuildables all take a bit of patience and work, but once they're right, they are awesome.

Also, please follow this thread, as I will be running a 3-way test soon of the new BilletBridge, which lets you use Aspire heads in the BB.

(And, for those using other tanks, I pointed out to K at Atmistique that the Aspire Nautilus heads have threading on the top of the coil, which means they should be able to build a device like the BilletBridge that works in any tank. I suspect those guys are on the design boards cooking it up as we speak.)

 

[willowize]

Just curious, how long does it usually take an order to reach the states. My order shows it shipped on 2/14 but it hasn't showed any movement since.

 

[Tudius]

Just curious, how long does it usually take an order to reach the states. My order shows it shipped on 2/14 but it hasn't showed any movement since.

I ordered my Billet Bridge first day they were available. They just landed on the east coast this morning.

 

[Akdare]

Just curious, how long does it usually take an order to reach the states. My order shows it shipped on 2/14 but it hasn't showed any movement since.

You do know you can track it via the USPS website and it will start tracking as soon as it reaches the US.

 

[Kataphraktos]

Just curious, how long does it usually take an order to reach the states. My order shows it shipped on 2/14 but it hasn't showed any movement since.

Mine shipped on the same day, and just showed up in a sorting facility in NJ today.

 

[willowize]

USPS still showing Origin Post is Preparing Shipment.

Edit: Just showed in NJ, Yeppee!

 

[Kataphraktos]

USPS still showing Origin Post is Preparing Shipment.

Edit: Just showed in NJ, Yeppee!

Our gear should work, it's been thoroughly tested by dedicated postal workers

Sent from my SGH-T889 using Tapatalk

 

[Brutus Buckeye]

Just swinging by to say hello to my BB family, been to long. My BB is still my go to device.

 

[willowize]

Just swinging by to say hello to my BB family, been to long. My BB is still my go to device.

View attachment 311915

Long time no see! Good to see ya back. I totally agree on the "Go To Device".

 

[willowize]

Our gear should work, it's been thoroughly tested by dedicated postal workers

Sent from my SGH-T889 using Tapatalk

 

[Katdarling]

'Ello Brutus...... good to see you back here!

 

[ThreeDJ16]

Our gear should work, it's been thoroughly tested by dedicated postal workers

Sent from my SGH-T889 using Tapatalk

Pfft...they aren't testing it, don't you know they use our packages for soccer practice. So you just have to be patient till they grow weary of kicking it around and move on to a fresh non mangled package.

 

[xtreme101]