- Status
All the best to you and your loved ones, DD
Now rocking with my own BB with flanged Diver (with no modification) and RSM full fat boy tip.
Now rocking with my own BB with flanged Diver (with no modification) and RSM full fat boy tip.
Hello guys! Just wanted to let people know who are still wanting to own a Piebald, or regular BB that I will sending a mass email to all registered users on the new forum (Link is in my sig).
They generally go on sale every Saturday (Besides this Saturday due to the beautiful addition to the BB family).
Piebald BB/Regular BB availability
If you haven't already, please register with an email you regularly check. You can subscribe to the thread above, but not necessary as I will be sending an email from the forum to all users.
And please, PLEASE don't FLIP. That's not cool! A dino might haunt you in your sleep!!
They generally go on sale every Saturday (Besides this Saturday due to the beautiful addition to the BB family).
Piebald BB/Regular BB availability
If you haven't already, please register with an email you regularly check. You can subscribe to the thread above, but not necessary as I will be sending an email from the forum to all users.
And please, PLEASE don't FLIP.
That's not cool! A dino might haunt you in your sleep!! 
It isn't flipping if your buying it as a gift is it? He got me one last for our anniversary. But I haven't used it much since he keeps borrowing it! So I'm thinking Santa should get him his own!
No, Flipping means when you purchase a BB and put it up for sale at a higher price. But, you have to wait for at least 8 weeks, or your order might be cancelled.. Not 100% sure tho..
Not 100% sure tho..
But, you have to wait for at least 8 weeks, or your order might be cancelled..
I forget about 8 weeks rule and tried to buy another one (was so excited to be up when alerted and it went through the payment system!!!). It was canceled without notice. Now I gotta time the stars and moon correctly in December so I can get my second one!!! I need THREE of 'em for three locations I live in!!!
Hello guys! Just wanted to let people know who are still wanting to own a Piebald, or regular BB that I will sending a mass email to all registered users on the new forum (Link is in my sig).
They generally go on sale every Saturday (Besides this Saturday due to the beautiful addition to the BB family).
Piebald BB/Regular BB availability
If you haven't already, please register with an email you regularly check. You can subscribe to the thread above, but not necessary as I will be sending an email from the forum to all users.
And please, PLEASE don't FLIP.
I just registered over there. Can't have enough notification
. Although I find it hard enough I keep up with this bard much less another but hey, will give It a shot Looks good over there
On FB ....
Atmistique, all about vape
We listen ... Diver V2
It's been nearly seven months since the release of Diver, our first project in manufacturing atomizers. On this occasion we would like to thank you for your confidence and above all for your useful comments you shared with us, in order to make it even better.
All this time we collected your suggestions and from late August we started designing the new Diver. Head of the project is Tasos (TasosVaps) using the successful implementation of John (Craven). Our main goal was to improve the liquid feeding and simplify the setup by retaining and even improving the performance of the first version, while striving to achieve an affordable final cost.
So we raised the base, putting the wicks inside the liquid while retaining the side feeding of liquid. The pin of center pole is held by two o-rings, replacing the two acetal pieces of the first Diver. Finally, adopting the bell type tube philosophy of our beloved IATTY atomizer, we changed the interior design of the tube.
So Diver V2:
Is - like the first Diver- made from stainless steel type AISI 304L and the tube is now one piece (including the threads)
Gives a steady supply of liquid without additional settings at all levels of the tank
The set-up is done very easily, without the need for measurements
Has a better seal thanks to the two o-rings of the base
Provides optimum taste and vapor density, thanks to «IATTY like» tube.
Is able to be configured by the user, choosing between:
o Stainless steel or brass pole
o Base with or without flange
o Tube 35,5 mm, 45,5 mm, Grail (for conversion to dripping RBA) and a special edition in 35,5 mm (extra tubes may be purchased separately)
o Combination of the above will provide a BilletBox version.
Finally, we would like to thank Thanasis (Imeo) for the concession to use his original ideas and Matthew and Anne from the Billet Box for their kind cooperation.
Happy Diving
The Atmistique team
Atmistique, all about vape
We listen ... Diver V2
It's been nearly seven months since the release of Diver, our first project in manufacturing atomizers. On this occasion we would like to thank you for your confidence and above all for your useful comments you shared with us, in order to make it even better.
All this time we collected your suggestions and from late August we started designing the new Diver. Head of the project is Tasos (TasosVaps) using the successful implementation of John (Craven). Our main goal was to improve the liquid feeding and simplify the setup by retaining and even improving the performance of the first version, while striving to achieve an affordable final cost.
So we raised the base, putting the wicks inside the liquid while retaining the side feeding of liquid. The pin of center pole is held by two o-rings, replacing the two acetal pieces of the first Diver. Finally, adopting the bell type tube philosophy of our beloved IATTY atomizer, we changed the interior design of the tube.
So Diver V2:
Is - like the first Diver- made from stainless steel type AISI 304L and the tube is now one piece (including the threads)
Gives a steady supply of liquid without additional settings at all levels of the tank
The set-up is done very easily, without the need for measurements
Has a better seal thanks to the two o-rings of the base
Provides optimum taste and vapor density, thanks to «IATTY like» tube.
Is able to be configured by the user, choosing between:
o Stainless steel or brass pole
o Base with or without flange
o Tube 35,5 mm, 45,5 mm, Grail (for conversion to dripping RBA) and a special edition in 35,5 mm (extra tubes may be purchased separately)
o Combination of the above will provide a BilletBox version.
Finally, we would like to thank Thanasis (Imeo) for the concession to use his original ideas and Matthew and Anne from the Billet Box for their kind cooperation.
Happy Diving
The Atmistique team
Just trying to clarify whether or not there will be a release this Saturday. Completely understand if there isn't. I would understand several weeks, just want to make sure I don't wait longer than I have to. Hope all is going well, and that there is sleep being had by somebody aside from the little baby girl.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Sent from my SAMSUNG-SGH-I537 using Tapatalk
I'm pretty sure there will not be any this week, but if you register at the BB forum, the good folks there will notify you when they're in stock. http://www.e-cigarette-forum.com/fo...forum/357383-billet-box-753.html#post11255895
It states on the BB website.....
Nov 8th News:
There will be NO new Billet Box Batch up for sale this weekend. All correspondents (phone and e-mail) will be delayed due to infant birth!!!
" it's a Girl "
Be surprised if there are any for sale this weekend either, no matter how much he loves the BB his cute baby is going to take up all his time, and rightly so!
****************CONGRATULATIONS ***************
Nov 8th News:
There will be NO new Billet Box Batch up for sale this weekend. All correspondents (phone and e-mail) will be delayed due to infant birth!!!
" it's a Girl "
Be surprised if there are any for sale this weekend either, no matter how much he loves the BB his cute baby is going to take up all his time, and rightly so!
****************CONGRATULATIONS ***************
Last edited:
Hopefully they will be back in action for this weekend (Keeps fingers crossed)!!
I hope so, my mum is really after one, she used mine and fell in love with it!
That's saying something, she has never been impressed with any of my Vaping gear, Ego batteries have always made her happy enough, she didn't even flinch when she saw the price (which is a bargain but she is used to paying £6 for an ego battery lol)
That's saying something, she has never been impressed with any of my Vaping gear, Ego batteries have always made her happy enough, she didn't even flinch when she saw the price (which is a bargain but she is used to paying £6 for an ego battery lol)
Konstantinos from atmistique said...
"In a couple of days we will release video's for it.
Οur efforts are set to maximum so everything is going to be ready at the proper quality and price. You will be informed during the process"
So no definitive date yet, from when I chatted to him in a pm it sounded like it will in the next few weeks, looks perfect, might hold off before I mutilate my diver with my inadequate diy skills.
Make sure when you place the order, it's with a different CC #, and shipping address so they won't flag you and kick back your order.
Cheers bud, she will be ordering it so that will be fine, I've given her some hints and tips so fingers crossed for her!
I'll be quite proud of her if she bags one, a year ago she wouldn't touch a pc, after a few hours teaching her the basics she is on one all the time now, I'll never forget the shock of getting a Facebook request from her, I was shocked she had set it all up on her own!
Only a week earlier it had taken an hour showing her how to send an email (admittedly I had to go and change all her Facebook privacy settings though lol)
I'll be quite proud of her if she bags one, a year ago she wouldn't touch a pc, after a few hours teaching her the basics she is on one all the time now, I'll never forget the shock of getting a Facebook request from her, I was shocked she had set it all up on her own!
Only a week earlier it had taken an hour showing her how to send an email (admittedly I had to go and change all her Facebook privacy settings though lol)
Last edited:
- Status
Similar threads
