- Status
I just ordered a bunch from Amazon. I don't want to post the link until I'm 100% certain they're correct though. I'll have that answer later tonight.
Tap, Tap, Tap.... Talk.
I had a similar situation last week. I was only able to slide the cover half way and then stuck. Played with it a bit and after a few more minutes started thinking I am now screwed. Did not want to force it to much and cause more damage and finally did get it off.
I have been olive oiling the cover slides so needed to figure out what up. After examining it a little more realized that it was the clear plastic j-wrap. I did have the j-wrap perfectly installed and centered on the BB door but after a couple weeks use seems it may have streched a we wittle bit to interfere with the slides of the cover.
After my heart beating episode removed the j-wrap and decided it is time to give my BB it's own unique character. Now I really love the feel of the carbon fiber and aluminum in my hand instead of the plastic j-wrap.
I had the exact same issue with the clear J-Wrap, and have since (and quickly) replaced it with another. My opinion is either keep it scratchy, or stick with the vinyl or carbon fiber options.
I hadn't realized that the tips aren't due in until Friday I did measure them out though, so I'm fairly certain they're the correct ones. I'm posting a link now but please be warned that they've not yet been verified. If any of you are adventurous, feel free. Otherwise, I'll update upon arrival.
Unless the venerable Mr. Dino chimes in here, with either confirmation or correction. That remains an option too.
Dispensing Needle, Plastic Tapered Pink 20 ga 0.024id x 1.25" Tip, 50 pcs: Amazon.com: Industrial & Scientific
They are color coded by gauge and are luer lock threaded, so pretty safe to think these are correct. The color that comes with the BB is also pink.
Here is the UK amazon listing.
http://www.amazon.co.uk/Plastic-Tap...Dispensing+Needle,+Plastic+Tapered+Pink+20+ga
Here is the UK amazon listing.
http://www.amazon.co.uk/Plastic-Tap...Dispensing+Needle,+Plastic+Tapered+Pink+20+ga
Last edited:
I'm thinking the same thing, DJ, but I wanted to be clear that I hadn't had the opportunity to firmly confirm it.
In other words, if they're wrong, don't blame me
I'm thinking the same thing, DJ, but I wanted to be clear that I hadn't had the opportunity to firmly confirm it.
In other words, if they're wrong, don't blame me
Is "firmly confirm" redundant? Hmmm....
Pink is not my favorite but if it works, good enough, just thinking about what to do with 50 pink needles pcs….
Yesssss, purchase syringes and bottle to compete BBV care kit
I think I vape too much today
I...
kinda...
like...
PINK.
I use the green ones, left over from my Kayfun days. Work just as well for me.
Hey All,
Update on the BilletBridge after about 3 days and 3 tanks. So far so good. My BB has never seen so much action, even joining me out and about town.
The flavour with these Aspire BDC heads has been consistent and good, definitely a notch or two better than the Evods. I have noticed the dual coils are definitely running hotter as my GVC is darkening quite quickly. Note the heads are 1.8 ohms and I'm running the BB at about 4.25V.
If anyone has any specific questions just throw them my way.
Take it easy.
Nib
Update on the BilletBridge after about 3 days and 3 tanks. So far so good. My BB has never seen so much action, even joining me out and about town.
The flavour with these Aspire BDC heads has been consistent and good, definitely a notch or two better than the Evods. I have noticed the dual coils are definitely running hotter as my GVC is darkening quite quickly. Note the heads are 1.8 ohms and I'm running the BB at about 4.25V.
If anyone has any specific questions just throw them my way.
Take it easy.
Nib
I am guessing the blue would work too, think it is 22 gauge (might be a little slow with thick liquid though).
Hey Drunk_J haven't I seen ya around a somewhere.
Whatchu talking bout Wills? Hehe
Oh sorry think I mistook you for a ferret person I knew. 
- Status
Similar threads
