~The Billet BoX~

Status
Not open for further replies.

Rmervin

Senior Member
Supporting Member
ECF Veteran
Verified Member
Jul 24, 2013
132
233
NC
Hi all. Having trouble getting the diver V2 to wick. Is there maybe a suction issue with the BB tank? All I seem to get are dry hits and flooding in the center hole. I tried posting the question in another area of the forum with no luck. Ideas? I'm using cotton wick btw.

It may or may not be a suction issue but I am able to wick the shipped 1.8 ohm and the greater than 3 ohm coil that I have built for at least a tank. I've only used silica standard coils and not cotton micro. A friend said you can try a bit of electrical tape over the ball to resolve suction, but I only switched to a lighter juice.
 

Peter_C

Who?
ECF Veteran
Verified Member
Nov 7, 2013
1,856
5,126
63
Akron, Ohio
www.facebook.com
Ha, I'm like a child with my fingers stuck in my ears, "I can't hear you I can't hear you I can't hear you!"
Got a few things to buy in a week or so from him, I'll see if he has a spare or two lying around to send to me.

Some people are too nice :) At least be sure to tell him *why* you are asking - for some fool that loses stuff way too easily~!
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,995
183,090
Midworld
Some people are too nice :) At least be sure to tell him *why* you are asking - for some fool that loses stuff way too easily~!

You can't beat yourself up over stuff like that, Peter. I've broken the best of things, and will almost certainly lose that little ring sometime myself. Life, it goes on.

Besides, rings are replaceable. Just ask any woman who's remarried. ;-)

Sent from a Galaxy, far-far-away.
 

petemoss

Super Member
ECF Veteran
Verified Member
Nov 16, 2013
661
1,299
Queens, NY
Hi all. Having trouble getting the diver V2 to wick. Is there maybe a suction issue with the BB tank? All I seem to get are dry hits and flooding in the center hole. I tried posting the question in another area of the forum with no luck. Ideas? I'm using cotton wick btw.

Probably too much wick blocking the juice channels I'd guess. I find that the best wicks for the diver v2 are thin, almost wispy wicks that lie flat against the ceramic cup. When viewed through the feed slots, you can hardly see the wick. Try trimming and thinning the wick going down the side of the cup. That should give more room for the juice to travel up to your coil.
 

2423kids

Ultra Member
ECF Veteran
Verified Member
Mar 22, 2012
1,165
3,400
VA and FL
Big smile from me, Kids. I hope you keep liking it! It'll taste even better tomorrow.

Sent from a Galaxy, far-far-away.


About that "It'll taste even better tomorrow." You were RIGHT DP!!!! ( And I rarely say that to a "guy"!! Haha! ;-) )

Alrighty ... Sabot-DDD plugged in Monday evening. Two full days with it at this point. Flavor is great! Not a single drop of leakage or "condensation" so far. Being a BB carto user ... It's a little weird to not hear that snap, crack, pop of a carto. The draw is smoother than a carto. I'll admit to being a little absent lately (real life is REALLY busy these days), so I've not kept up like I should have. Was there mention along the way of an air flow control? Is this something that is on the final version we'll be getting? I might like just a tad bit tighter draw. Other than that this thingy ROCKS and I'm really looking forward to owning one!! Woot! :D
 
Last edited:

Kataphraktos

Vaping Master
ECF Veteran
Verified Member
May 1, 2013
3,241
10,032
New York, NY
Hi all. Having trouble getting the diver V2 to wick. Is there maybe a suction issue with the BB tank? All I seem to get are dry hits and flooding in the center hole. I tried posting the question in another area of the forum with no luck. Ideas? I'm using cotton wick btw.

Hit up the official Atmistique thread, that's the place for all Diver assistance.
 

Scubabatdan

Vaping Master
ECF Veteran
Verified Member
Jul 14, 2009
4,749
6,733
62
Dothan, AL
About that "It'll taste even better tomorrow." You were RIGHT DP!!!! ( And I rarely say that to a "guy"!! Haha! ;-) )

Alrighty ... Sabot-DDD plugged in Monday evening. Two full days with it at this point. Flavor is great! Not a single drop of leakage or "condensation" so far. Being a BB carto user ... It's a little weird to not hear that snap, crack, pop of a carto. The draw is smoother than a carto. I'll admit to being a little absent lately (real life is REALLY busy these days), so I've not kept up like I should have. Was there mention along the way of an air flow control? Is this something that is on the final version we'll be getting? I might like just a tad bit tighter draw. Other than that this thingy ROCKS and I'm really looking forward to owning one!! Woot! :D

Yes the version in the co-op is with air control. They will arrive tomorrow at Drunk_J's house. A quick re-box and they are on their way to yall.

Dan
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,593
167,880
Utopia
About that "It'll taste even better tomorrow." You were RIGHT DP!!!! ( And I rarely say that to a "guy"!! Haha! ;-) )

Alrighty ... Sabot-DDD plugged in Monday evening. Two full days with it at this point. Flavor is great! Not a single drop of leakage or "condensation" so far. Being a BB carto user ... It's a little weird to not hear that snap, crack, pop of a carto. The draw is smoother than a carto. I'll admit to being a little absent lately (real life is REALLY busy these days), so I've not kept up like I should have. Was there mention along the way of an air flow control? Is this something that is on the final version we'll be getting? I might like just a tad bit tighter draw. Other than that this thingy ROCKS and I'm really looking forward to owning one!! Woot! :D

Agreed. Nothing better than the Rice Krispies-esque sound of a humming karto in da morning. (also known Rice Bubbles - did ya know that?). And I do believe that the version of the Sabot that we shall be getting does indeed have air control. And that's a GOOD thing. I'd also like a bit of a tighter draw on it. Glad you're enjoying, Kidsie girl.

Martha~
 

2423kids

Ultra Member
ECF Veteran
Verified Member
Mar 22, 2012
1,165
3,400
VA and FL
Just got a email notification saying I am getting a package (Sabot) :)


DITTO!!!!

E9C91852-285C-4FC7-B938-C7E2FD5D8E82-906-000000AA8B25AA9F_zps94af86eb.jpg


:D
 

Big Screen D

Ultra Member
ECF Veteran
Verified Member
Aug 5, 2011
2,292
2,830
Georgia
Always a good idea to check on announcements in the coop forum, as that is where important information is posted. Just goto forum thread and do a search for announcements.

To put it another way, J is doing like most vendors do. Shipping label is printed, but not quite shipped yet:D
 
Status
Not open for further replies.

Users who are viewing this thread