I believe DD said they wouls go on sale in about a wrek or two..
I will definitely be picking up a few when they do
Sent from my SGH-T999 using Tapatalk 2
Ten ten ten characters (sitting in a tree...)
Last edited:
- Status
Ten ten ten characters (sitting in a tree...)
Capacity 880mAh (Manufacturer Stated) - Our Tests 658mAh
16340 (CR123A) High Quality Li-ion Cells
Charge voltage: 4.2V +/-0.05
Discharge voltage: 2.75V
Protection Built in Li-ion Rechargeable 3.7v battery
Size: 16.65mm ±0.1 Diameter x 35.80mm ±0.1
Test / Review: Yezl 16340 880mAh (Gray) | BudgetLightForum.com
16340 (CR123A) High Quality Li-ion Cells
Charge voltage: 4.2V +/-0.05
Discharge voltage: 2.75V
Protection Built in Li-ion Rechargeable 3.7v battery
Size: 16.65mm ±0.1 Diameter x 35.80mm ±0.1
Test / Review: Yezl 16340 880mAh (Gray) | BudgetLightForum.com
Keeping the mod scratch free with daily use is near to impossible but I'm liking the the "matured" look of it now. The carbon plates hold up really well. Just keep the sliding plated lubed, I've been using my FP10 gun lube a drop in the groove, smear it with my finger and she is sliding smooth. As for those wondering about battery life with the recommended AW protected ICR 16340s. Just buy four, get yourself a SysMax (NiteCore) I4 or I2 intellicharger and call it a day. I work a 12 hr night shift 7p-7a. Two will last me from when i get up, throughout work, to when when i get to bed. When the batteries die, swap in some fresh ones, which i usually keep in my work bag. Always use a battery case when you carry them. Don't want them to give you a "hot pocket" if they touch change or keys ( yes i know the feeling ) and you're all set till you get home to recharge the dead ones.
Last edited:
I also would like to know if the yezl fit they come out better than the black aw protected batts recommended and there cheaper.If i had to choose and the yezl dont fit id go for red aw as they are higher capacity and should last much longer
edit to say i have read that the protected ones are a bit longer at 36mm if this is the case on the black batts then it would mean the yezl fit! but havent got any so cant measure
edit to say i have read that the protected ones are a bit longer at 36mm if this is the case on the black batts then it would mean the yezl fit! but havent got any so cant measure
Last edited:
I'll stick with my black aws .. since I already have them
Sent from my SGH-T999 using Tapatalk 2
Sent from my SGH-T999 using Tapatalk 2
I won't even get the BB until this week and already need/want more tanks! I think Doug said the guys name that will be making the tanks is "Tank"....LOL. So....Tank get to work on some tanks
And...........................tomorrow is Monday. By this weekend I will be sitting by my pool (that I am taking the cover off of this week) chillin' in my louge chair with ice tea and my BB
And...........................tomorrow is Monday
. By this weekend I will be sitting by my pool (that I am taking the cover off of this week) chillin' in my louge chair with ice tea and my BB
I want more tanks already too! And I can't wait to show of my bb to everyone!
Sent from my SGH-T999 using Tapatalk 2
Sent from my SGH-T999 using Tapatalk 2
Crocky, you should bring your BB over to our vape meet in Knoxville on April 28th and we can make everyone else jealous together.
100% if i already had batts id not buy more, just looking for the best option thats all
I'll stick with my black aws .. since I already have them
Sent from my SGH-T999 using Tapatalk 2
i'm thinking in terms of the exposed metal-maybe get some clear wrap on it to protect it from scuffs, etc. it's such a beautiful device, i don't want anything to happen that doesn't need to happen. don't get me wrong-i'm proud of all of my "battle scars", but this thing is just a work of art!
and thanks for the advice on the batteries. i ordered the same ones recommended on the site (4 of them) from lighthound, and they will be here around the same time my bb arrives. i've already got a multi charger, so i'm set. it's great to know you can get 10 or so hours out of a fresh pair...man, this thing is going to be my baby!
I'm so pumped for next week!
I'll let mine patina naturally. Once it gets scuffed enough I'll either use some mothers or brush it with scotchbright.
Sent from my SGH-I717 using Tapatalk 2
I'll let mine patina naturally. Once it gets scuffed enough I'll either use some mothers or brush it with scotchbright.
Sent from my SGH-I717 using Tapatalk 2
scotch tape it... lol jk... after the 1st scratches i just said ..... it... still looks good sitting on table its just up close and personal you can see it. i'm sure once DD gets his new HAAS toy up in running it will be me more readily available. that's when i'll buy another one to keep at home with my GUS, GP PAPs and Chi-Yous
I emailed jwraps. Got carbon fiber clear carbon fiber and clear pieces for 14 bucks. Enough to cover the sides 10 times. Have to cut it your self tho
I just wanted to add... I think that the drip tip that is just going to go great with the Billet Box is any tip by
Drip Tip Designz - Drip Tip Designz . I know a few people have ordered one from there as did I in antapation of the Billet Box.
I wanted to try mine out before I got My Box, I think there is a big difference in these tips, I especially like the metal cores.
For some reason, it just sems to have a much cleaner taste (might be abit pricey, but worth the money)
Drip Tip Designz - Drip Tip Designz . I know a few people have ordered one from there as did I in antapation of the Billet Box.
I wanted to try mine out before I got My Box, I think there is a big difference in these tips, I especially like the metal cores.
For some reason, it just sems to have a much cleaner taste (might be abit pricey, but worth the money)
I did post on Jwrap's wall on Facebook about some kind of BB wrap, they said they're working on it. Hopefully we see something pre-cut soon
About batteries, I think I may have to order some IMR's now that I've seen that test graph lol. I have a few pairs of the ICR's sitting here ready to be used, but the more pairs the better haha.
About batteries, I think I may have to order some IMR's now that I've seen that test graph lol. I have a few pairs of the ICR's sitting here ready to be used, but the more pairs the better haha.
I have that tip and another like it with a different opening from him as well, both are the black & gold
Personally, I have a couple of basic SS Mings kicking around I enjoy using, and will look great on my BB. Not too keen on wrapping my box up with a Jwrap, though -- I'll let it age and degrade naturally. Ultimately, it's a work of art, but it's also an item I'll be using every single day, and I'm not going to compromsie my enjoyment of it by wrapping it up in bubblewrap whereever I go.
Haha, I agree.. I definitely want to preserve its beauty, but I'm personally not a fan of wraps
- Status
Similar threads
