- Status
Haha. I'm trying to get my Diver working well enough to determine if I should grind it down to put in the BB. I just finally got my Killer working well... I'm slow with this res/no res wire stuff.
Sent from my SGH-I717 using Tapatalk 2
Sent from my SGH-I717 using Tapatalk 2
Man, glad your still under warranty. I just now noticed the 30 day warranty. Guess I will be handling the BB with extreme caution. Was hoping this would be my away from home vape, but only 30 days isn't to reassuring. Oh well still looking forward to getting mine.
Sent from my SCH-I605 using Tapatalk 2
Nice day out there today. Took my little buddy out fishing with me. The BB loves rocks.
What is reassuring is how few people have reported problems with the BB. That is precisely why I stupidly waited when ordering first became possible in December. I wanted to wait for the reviews to avoid any disappointment. After the reviews started pouring in, my only disappointment was that I had played it too cautiously months ago. This is definitely my away from home vape. The first couple of days I took my provari with me just in case, but since then my provari has been rather neglected. I did fill up a tank with some new juice yesterday and used the provari to vape it since I only have one tank for my BB. Thankfully, I have a wonderful all day vape so most of the time my BB with its one tank is all I need to get me through an entire day.
Just stopped by to say hey.. Also I love that I only have to carry 2 thing now with me since giving my genny's a rest.
I consider both my security!
Still not as good as Ab at staging!
Sent from my SPH-L710 using Tapatalk 2
I consider both my security!
Still not as good as Ab at staging!
Sent from my SPH-L710 using Tapatalk 2
Just stopped by to say hey.. Also I love that I only have to carry 2 thing now with me since giving my genny's a rest.
I consider both my security!
Still not as good as Ab at staging!
Sent from my SPH-L710 using Tapatalk 2
Man, guns freak me out. I suppose its a cultural thing. Knives on the other hand are all good!
Man I luv my guns. They are works of art in their own right. I like my knives as well.
Sent from my SCH-I605 using Tapatalk 2
I like knives too, but I don't bring them to a gun fight..
i live/work in a spot that makes it a must. Otherwise I wouldn't own one... Sent from my SPH-L710 using Tapatalk 2
Hmm, so I got my bullet punch last night. Holes are kinda small, so I punched 3 of them. It seems like it's vaping fine but no bubbles from carto.
Also, it seems like there's some leaking in the back of the tank. When I pull it out, I have to kind of softly "pry" it out with a fingernail and there's juice on the back and sides. What could be the issue?
Also, it seems like there's some leaking in the back of the tank. When I pull it out, I have to kind of softly "pry" it out with a fingernail and there's juice on the back and sides. What could be the issue?
Verify if it is e-liquid or condensation. If it is e-liquid, then it is probably a leaking o-ring around the carto, or it could be the tank gasket. You can remove the tank while it's full and place it on a napkin to observe it to find the leak.
If the moisture is actually just condensation, then I don't think there is much you can do. Humidity and temperature (ambient as well as the device temp) dictate how much condensation may or may not form on the aluminum. I have had it a few times, and it creates a little vacuum behind the tank which requires prying the tank out with a nail file or small screwdriver. I haven't had any condensation buildup for quite awhile though.
Whew! Glad to see ya Silent E. I was tired of listening for pins to drop So quiet.
Still waiting on that same punch.
So quiet. Still waiting on that same punch.
Hmm it looked a little thick to be condensation, but I'll leave a tank on a napkin tonight and see what happens. I really hope it was just condensation though, I don't want to change the rings yet lol.
Whew! Glad to see ya Silent E. I was tired of listening for pins to drop
Still waiting on that same punch.
Hah I was shooting all day, just got home. I didn't realize how quiet it got in here today, it'd actually surprising.
The punch is good. Holes are small, but there's pretty much no deformity when punching. Probably better for thinner juices though.
I haven't stopped by the BB thread in quite some time. I see you got your box Silent. Congrats!
Hmm it looked a little thick to be condensation, but I'll leave a tank on a napkin tonight and see what happens. I really hope it was just condensation though, I don't want to change the rings yet lol.
Hah I was shooting all day, just got home. I didn't realize how quiet it got in here today, it'd actually surprising.
The punch is good. Holes are small, but there's pretty much no deformity when punching. Probably better for thinner juices though.
It's just condensation. Mine does that sometimes. Wipe the positive contact, or replace the red rubber o-ring around it. That usually fixes it. Also, inhale after you take your finger off the button and that will help stop the condensation.
It's been a while since I was using the Phoenix Raven and since I got a new shipment in I thought I'd fire one up. disappointingly, the wicking was poor and between last night and today I seemed to be suffering from nic starvation. Kept fiddlin' with it until tonight, when 'nough was 'nough, and put in a new one out of the box.
World of difference - wicking is great and just as remembered from my earlier ones. Sadly, guess that means we can expect some bad ones to slip through on occasion. The first one was shipped in the phoenix tank and the second was from a fresh box. May explain some of the inconsistency others have seen in fitting it to the BB.
World of difference - wicking is great and just as remembered from my earlier ones. Sadly, guess that means we can expect some bad ones to slip through on occasion. The first one was shipped in the phoenix tank and the second was from a fresh box. May explain some of the inconsistency others have seen in fitting it to the BB.
Doug,
Any more updates on tank availability? Incase i have not said it yet...I am dying for more tanks....LOL. I know I am a PITA, but that is one thing I do well...hehe
I know you guys are doing what you can and mentioned you would be focusing on tanks right now while you fiddle with your new "thingy" since you have not named her yet, thought that might be fitting
Any more updates on tank availability? Incase i have not said it yet...I am dying for more tanks....LOL. I know I am a PITA, but that is one thing I do well...hehe
I know you guys are doing what you can and mentioned you would be focusing on tanks right now while you fiddle with your new "thingy" since you have not named her yet, thought that might be fitting
Hey BB family just wanted to wish you all a happy Saturday night! Heading out to an Off The Wall concert! To enjoy some good ole imitation Pink Floyd! Enjoy your evening guys!
Sent from my Galaxy SIII using Tapatalk II
Sent from my Galaxy SIII using Tapatalk II
Good evening everyone! Been out car shopping all day.. Ugh
Why can't car shopping be easier
Why can't car shopping be easier
All right tinkerer's. This threads for you.
Maybe someone around here with a CNC machine might be interested in something along these lines.
http://www.e-cigarette-forum.com/fo...rototype-mod-billet-box-only.html#post9375371
Maybe someone around here with a CNC machine might be interested in something along these lines.
http://www.e-cigarette-forum.com/fo...rototype-mod-billet-box-only.html#post9375371
- Status
Similar threads
