The Stopwatch and Juice Puck MOD

[se7en5]

Hey Everyone I've been vaping for 3 months and was recently let go from work so have used that time to do some mods I will be posting. I thank all the posters on how to's as that has helped me out alot. I tried to do some things I havent seen around.
I call this one my stopwatch mod it is made from an icebreakers tin I like the way it holds and vapes well on 3.7v ....
Also showing my 2nd Strange Mod with a juice "side feeder". It is fully working but i need to do some rewiring and capping of the wires. The 2 carts are held together with a moldable plastic that molds under heat. The smaller opening of the icebreakers opens to squeeze the 3ml bottle the top opens to insert the battery. Unlike my 1st one there was no room for an on/off switch so just using the button switch and I unplug when not in use.
I didnt have enough posts originally when I made these to post them in the mod section now I am posting the "early work" as well as some newer ideas. Thanks to all the posters showing how-to's.........

 

[Bubo]

Nice!
I like how everything is easily accessible.. The whole cover comes off too if I remember correctly, right?
Can you post a picture of the innards? From what I can see you are using a square battery and the atty is off to the side? I can't tell what the cart is connected to? A chamber of sorts?

 

[se7en5]

The inside protections I had to take out to show the idea better. I have molded plastic covering for everything. The standard is pretty self explanatory and used a rca connector pop on/off idea from a poster on this forum (sorry dont know who).
The juice feeder feeds to the side and goes into a patch of blue foam to the atty and the top cart is empty (no filler) molded right ontop of where the atty sits. The bigger part of the tin opens for battery access and the bottom opens to squeeze the 3ml bottle. The juice feeder doesnt give the best hit ever but only tried it with thick (bad) bannana fosters which is almost out I think it would be alot better with thinner juice which I will try soon and post the results. Both run on a 3.7V mini heli battery since I had 7 lying around tried it since of the size. Waiting on the connectors.....
I am finishing up on a bottom feeder "puck" style and a 5v with a volatage LED that uses regular AA batt case I will post soon. After that I have 3 more variations of the icebreakers tin I am making now and should have done next week I will post also. I am trying to make one self contained so you pop it in your pocket like the candy and the cart is inside the tin.(Open up the big end and pop out the cart screw in and go.)
This .... is addictive........

 

[Para]

I like your workbench area with the foam to hold items....what do you use to cut the holes?

Thanks

 

[se7en5]

I like your workbench area with the foam to hold items....what do you use to cut the holes?

Thanks

Its Moldable plastic called Instamorph I have a post about it I put up last week ....
http://www.e-cigarette-forum.com/forum/modders-forum/125244-personal-charging-station.html
I am adding to it for my 501 and all modding supplies pretty soon it will be the twice the size and counting lol

 

[Para]

That's way cool....thanks

 

[Bubo]

Nice....
Good info about the InstaMorph too! (Pays to post in more than one section!)