"thin" vapor

[ThatsAllBlokes]

I have a brass king clone, dual coil(30g, 8 wraps) nimbus clone with 2 3mm, and 1 1mm holes. My juice is 70vg/30pg. To get a thicker/denser vape what should I do? Like right now when I let it out slowly onto a table, it just disintegrates into the air. I want it to be dense enough so it will actually sit on the table.

 

[Bunnykiller]

whats the humidity of the air right now? Hi humidity = longer lasting vape clouds, low humidity = fast evaporating clouds.... go into the bathroom turn on the shower realy hot, steam up the bathroom and try it again... big difference

 

[ThatsAllBlokes]

whats the humidity of the air right now? Hi humidity = longer lasting vape clouds, low humidity = fast evaporating clouds.... go into the bathroom turn on the shower realy hot, steam up the bathroom and try it again... big difference

Not humid at all, i'd say it's a bit chilly in my room. That's not really possible for me, I live in dorms xD

 

[Lewtz]

VG carries the amount of vapor production, could try a 100% VG juice like Boba's Bounty.

 

[dvdgroover]

70/30 should produce good vapor. I'd guess the humidity is low. Straight vg n high humidity is the best way to get thickest vapor

 

[ions]

Make sure the battery is fully charged and try sanding down your contacts, most clones don't have the best connection contacts.

I vape mostly 50/50 and I get clouds for days when I vape on my mechs, clones or not so a 70vg/30pg should be good to go. Unless they accidentally gave you 70pg/30vg

 

[TheReign]

def try some 100%vg

 

[Cadeus333]

I'd say It's either the contacts or the juice mix. Could also be the batteries if they are pretty old.