Too Much Vapour

[Heavyrocker]

With this Natural Telescope and the RSST tank wrapped at .80 ohms and 32 ga wire,its just too much vapour,taste and TH are great tho,why me? BTW,my RSSST came with 2 small airholes:vapor opposite of each other and it seems too work too good,i may have too plug one up.:

 

[Steam Turbine]

I know. It's sucks when things works to well!

 

[BigEd781]

I realize this is pretty basic and you have probably already tried it, but since you don't mention doing so... have you tried turning the air hole away from the wick a bit? Perhaps you don't like that much TH, but it will definitely decrease the amount of vapor.

 

[Steam Turbine]

Just wrap a 1.5Ω and you problem is solved.

 

[Heavyrocker]

I realize this is pretty basic and you have probably already tried it, but since you don't mention doing so... have you tried turning the air hole away from the wick a bit? Perhaps you don't like that much TH, but it will definitely decrease the amount of vapor.

TH is perfect,i was actually being sarcastic,but twisting the air sounds good,did you ever hear of 2 air holes? Wrapping a 1.5 ohm sounds good too,his way i can use it on the Vamo,one thing i do notice tho is with a sub ohm wrap,it eats the juice like crazy.My Vamo has been put on the back burner ever since i did the Natural/RSST set up.

 

[Iffy]

On da ECF, there is NO SUCH THING AS TOO MUCH VAPOR!!!

 

[brock957]

I agree with Jiffy. Thereis no such thing as to much vapor! The ECF police are coming to take away all your mod's and give you a Blue starter kit.

 

[SissySpike]

A bliss V2 has 2 air holes I have one going right now you can set it up with dual coils hence the two air holes but I prefer it in single coil. Both holes are very small but together its perfect!

 

[InTheShade]

I'm confused, I thought the RSST only had one airhole. Where did you get it from Heavyrocker? Did you modify it in any way?

Looks nice on the natural though, very, very nice. It's going to be my first RBA, but my normal supplier has them at almost $35 which is $7 more than I have seen them at other places. I suppose I just have to find another hardware supplier...

 

[Fizzpop]

There is no such thing as too much vapor.

 

[SissySpike]

I'm confused, I thought the RSST only had one airhole. Where did you get it from Heavyrocker? Did you modify it in any way?

Looks nice on the natural though, very, very nice. It's going to be my first RBA, but my normal supplier has them at almost $35 which is $7 more than I have seen them at other places. I suppose I just have to find another hardware supplier...

I think the OP was just wondering out loud if any genys had 2 air holes not that his has 2 air holes

 

[stormwench]

I don't think I have heard anyone complain about too much vapor... you will make a lot of vapers jealous

 

[Heavyrocker]

On da ECF, there is NO SUCH THING AS TOO MUCH VAPOR!!!

I know,i deserve a beat`n.

 

[Heavyrocker]

I don't think I have heard anyone complain about too much vapor... you will make a lot of vapers jealous

This just the AGA setup,the RSST blows this away,ive come a long way since my Ego C KIT.

 

[razor4432]

Tis fun blowing out big clouds isn't it. I think I've finally gotten my AGA-T+ set up pretty good. Running 1.5ohm right now on the Provari and using a 70/30 mix it's putting up some nice clouds Had put it down for a while since I was having trouble with it and ran out of wire. Keeping my fingers crossed this coil keeps running good.

How would you rate the RSST (this is the Smoktech one right) compared to the AGA as far as coil building is concerned? The B&M I go to has the Smok RSST for around $30 and had considered picking one up if it is worth it, along with the Kamry KTS or K100 on payday The AGA is a tad bit finnicky and I don't like the positive post nuts, would also like to be able to wrap a coil that's a little tighter as far as the spacing of the coils is concerned.

 

[Heavyrocker]

Tis fun blowing out big clouds isn't it. I think I've finally gotten my AGA-T+ set up pretty good. Running 1.5ohm right now on the Provari and using a 70/30 mix it's putting up some nice clouds Had put it down for a while since I was having trouble with it and ran out of wire. Keeping my fingers crossed this coil keeps running good.

How would you rate the RSST (this is the Smoktech one right) compared to the AGA as far as coil building is concerned? The B&M I go to has the Smok RSST for around $30 and had considered picking one up if it is worth it, along with the Kamry KTS or K100 on payday The AGA is a tad bit finnicky and I don't like the positive post nuts, would also like to be able to wrap a coil that's a little tighter as far as the spacing of the coils is concerned.

Exact same problem i had,this why i got the RSST,but i did master the AGA as you can see,i had too use the drill bit method too wrap the AGA.Its like night and day too wrap the RSST compared too the AGA.The insulator in the wick hole of the RSST does it,no hot spots at all.Its a Smok tank,i got mine for 22 bucks with extra orings and stuff.

 

[Heavyrocker]

I think the OP was just wondering out loud if any genys had 2 air holes not that his has 2 air holes

Mine came with 2 -1 mm holes,opposite of each other,seems too work great and no harsh taste at all.i think this is the latest run of tanks

 

[hellasupreme]

What kind of mesh you using? the aga-t+, i just wanna punt it out my door sometimes lol. I cant get that top screw to lock and the ohms changes everytime it moves

 

[Heavyrocker]

What kind of mesh you using? the aga-t+, i just wanna punt it out my door sometimes lol. I cant get that top screw to lock and the ohms changes everytime it moves

Im using 32g Kanthal,i know what you mean with the AGA,it took me weeks too get it the way i have it now,the center post kept spinning around and i had a hard time too get it tight,get the RSST and go back too the AGA later,watch out tho,some RSST`s have faulty 510 threading.mine did.RBA tanks are designed for mechs,if you want too wrap them for `VV/WW`s you might wanna try 30ga,less wraps the better.

400 MESH.

 

[DoogieTony]

Steven Dorff will be arriving shortly to punch you.