Yeah, you'll have some company there. With single, central coil it's not an issue IMO.
Train by Hotcig
- Thread starter roxynoodle
- Start date
- th_trl_thread_readers 0
- Status
Yeah, you'll have some company there. With single, central coil it's not an issue IMO.
Size comparison.
just tried it with 24g kantal and janked it out and used 28 g kantal micro coil . 1.2 ohms .next will try my favored 4 strands 34 again .very nice flavor . so far no leaking and for some reason not even condensation .
using it at all four airholes halv open ..got to find a way to align it to use one hole full open .
first try no complaints
using it at all four airholes halv open ..got to find a way to align it to use one hole full open .
first try no complaints
what ? I have one you don't have ?
ordered 2 attys on sale from ft ..just before their new year.
the trainvape and a gem like . both for 29 something.
the gem typy is the one without the orings . has better reveuys ..may be different manufacturers ?
is only about 1 mm taller and holds more juice .
vaping on all three of them ..jes still enjoing the aromamizer to .
all with single coils .at 12.5 to as HIGH as 16 watts .
cant wait to order the two in the works with roxynoodle
looking forward to try the big boys one with a single coil.
Just did a Vapecrawler search for Hotcig Train. Only two hits showed up: FT and Gearbest. No wonder it's such a sleeper. That and the new Aromamizer/Supreme RDTAs coming out.
hi westpole
at first as I said before no leaking not even condensation.
now done something I never did ..layed it and the gem clone on its side !...it put a puddle on the table . sooo leave it upright . the gem clone not a drop .
now another problem , cant get any flavor out of it !
the gem beats it hands down . so is the aromamizer.
got to play with it some more.
Single or dual coil?
Maybe a wick end has shifted from over a juice hole, and the wick is not staying juiced enough?
just have to go back and find out what I did wrong , it should be better . was in a hurry to try it lol.
single coil...will take a closer look at the coil placement and wicking . thanks
well using single coil builds I want only one airhole !
that's impossible with this one . at least on the aromamizer you could punch a hole in the vape band 1/4 in offset .
or use metal tape which looks a little nicer. and works great.
just came back from the drill press and put two holes side by side with some offset to close all except for the one airflow hole (1mm 2 times )now it works very nice with my small coil and 12 watts. just does not look to great .
so in my opinion where is the improvement from the oromamizer ? the gem clone is a much better atty all around.
still glad I got 4 aromamizers .
that's impossible with this one . at least on the aromamizer you could punch a hole in the vape band 1/4 in offset .
or use metal tape which looks a little nicer. and works great.
just came back from the drill press and put two holes side by side with some offset to close all except for the one airflow hole (1mm 2 times )now it works very nice with my small coil and 12 watts. just does not look to great .
so in my opinion where is the improvement from the oromamizer ? the gem clone is a much better atty all around.
still glad I got 4 aromamizers .
I have the version 2 (there was no mention of it on GB) and I have been using this for nearly a month now. Tried both sing and dual coil.
As RDA I have no problems
AS RTA;
Single or dual doesn't matter, after refilling from the top, although I close the air holes while filling, it leaks and gurgles. After half an hour or so, leaking and gurgling stops. The coil is the same as RDA, but the same wattage I use while in RDA is not enough in RTA. Wattage problem gets less once the gurgling stops, still needs more power then in RDA.
The NOT changeable mouth piece is terrible
I like to use my own drip tips and can't use them with this 
Anybody has a solution for the fixed mouth piece? Maybe a different made?
As RDA I have no problems
AS RTA;
Single or dual doesn't matter, after refilling from the top, although I close the air holes while filling, it leaks and gurgles. After half an hour or so, leaking and gurgling stops. The coil is the same as RDA, but the same wattage I use while in RDA is not enough in RTA. Wattage problem gets less once the gurgling stops, still needs more power then in RDA.
The NOT changeable mouth piece is terrible
I like to use my own drip tips and can't use them with this Anybody has a solution for the fixed mouth piece? Maybe a different made?
This atty should have been named Train Wreck, it could have been a contender with a couple of small changes. Juice Flow holes need to be opened, Chimney ID needs to be enlarged to prevent the gurgling/juice build up.
I saved mine from the Garbage can by using the top section from my Higo atomizer solves the fixed mouthpiece issue as well as the chimney too small. Unfortunately the Higo tank does not work, but the Tank from another turd atomizer fit, enter the glass from the Aqua FX.
With these changes it at least makes the Train not so much of a wreck, and I actually enjoy using it.
Oddly the top section of the train works perfectly on the Higo, makes it Nano mode and Vape is not bad at all.
Unfortunately unless you happen to have a Higo and Aqua FX lying around it probably will not help you.
Train with Higo chimney/cap Aqua FX Glass.
Higo with Train Upper
I saved mine from the Garbage can by using the top section from my Higo atomizer solves the fixed mouthpiece issue as well as the chimney too small. Unfortunately the Higo tank does not work, but the Tank from another turd atomizer fit, enter the glass from the Aqua FX.
With these changes it at least makes the Train not so much of a wreck, and I actually enjoy using it.
Oddly the top section of the train works perfectly on the Higo, makes it Nano mode and Vape is not bad at all.
Unfortunately unless you happen to have a Higo and Aqua FX lying around it probably will not help you.
Train with Higo chimney/cap Aqua FX Glass.
Higo with Train Upper
- Status
Similar threads
