triton

[theoddball]

Hi all has anyone got the new aspire triton kit I am looking at a new tank and new box mod I am curently running aspire atlantis and sub ohm aspire mod with 18650 batteries.

Is the new kit (mod and tank) worth the out lay?

 

[josh w]

I've compaired side by side the atlantis v2 and triton. Both perform well, as most aspire products do. The only knock my buddy had with the triton was some juice leaked out the air hole one time. We disassembled, cleaned, put back together tight and he hasn't had a problem since.

 

[theoddball]

I've compaired side by side the atlantis v2 and triton. Both perform well, as most aspire products do. The only knock my buddy had with the triton was some juice leaked out the air hole one time. We disassembled, cleaned, put back together tight and he hasn't had a problem since.

Thanks for the help.... now just decide what box mod to get lol

 

[josh w]

Haha. Snow wolf all the way. I absolutely love it.

 

[Susan~S]

Look at this review on the Triton.

Which coils would you most likely be using? Descriptions on each of the coils below are included in the review.

1. Vaping the 1.8ohm (10-13W)
2. Vaping the 0.4ohm stainless steel coil (25-30W)
3. Vaping the 0.3ohm coil (55-65 W)

How much power do you think you will need?

 

[Donso]

Hi everybody,
I also love my triton tank, bout thoug i cleaned it, it keeps leaking from time to time... I vape it at about 24watts.... what could be the matter ?

 

[Ou2mame]

Get a delta 2. They're cheaper, they work, and they have a very good rba.

 

[Donso]

Thanks, Ou2mame, I already ordered that one with RBA... lets see when it arrives to Panama , I´m pretty courious.
Again , thanks a lot. Which wire would you recommend to build 1,2ohm to 1,8 ohm ? I´m interested in good flavour, not that much vape... liquid is expensive here in Panama

 

[Ou2mame]

I build the delta with 26g, 6 wrap micro coil 3.5mm diameter, and its about 0.7 I believe, and the flavor is very good, very dense vapor too. If i wanted to build a 1ohm I would probably go with a 28g micro coil, 7 wraps or so at 2.5mm diameter should get you there. If I did an extra wrap or two I could get closer to 1ohm with the 26, but it would take more time to heat that much kanthal, so I would move to 28 for a 1ohm build. It's all preference. I think it comes with a 1ohm coil pre-built.

Check the steam calculator and plug in different numbers and see a what gauge coils at what diameter equal your target resistance.

 

[Donso]

@Ou2mame Hey, thanks a lot, that was pretty helpful! I ordered 28g and 30g with the Delta 2 and RBA section and also japanese organic cotton. And also the "DiY Kit" with ohmeter, coil makre, scissors, screwwdriver, ceramic "pinza" (forgot the english word...) well, everything redy for delta 2 coil builds )) lets see if I get the package next week

 

[Ou2mame]

Sounds like you're about ready! It's a great tank. I'm not a huge fan of the pre-built coils, but the rba is awesome and the tank itself is great. The only con is that it's a little hard to see the juice level in low lighting, but besides that it'd great.

 

[Zabolee]

I just picked this tank up 2 days ago, and I love the flavor. The only issues I'm having with it are that it leaks a little out of the top air flow slots. Even when closed off, they collect juice. Not enough to leak and cause a puddle to form, but enough that if I rub my had against them, I get covered in juice. I've also noticed that it gurgles like crazy. Not all of the time but enough to drive me nuts. I leave my mods on their sides so they don't get knocked over, and every time I pick it up, it'll gurgle for the first 10-20 hits.

 

[AXIOM_1]

I just got a Triton and absolutely love it.... I had been using the Arctic, which is good too, but I think the Triton has it beat in several ways. It's a very good tank for sure.

 

[Donso]

Hi everybody, hi @Ou2mame ,
I followed the advice from OU2MAME, and YEAH, the Delta II RBA section is really great.
Produces a lot of vapor, but whats the most impitant: the flavor is awesome and it´s very economic in e-juice
consumption.

I love the triton, but it consumes sooo much juice...
For thos who look for great flavour, Delta II RBA is the one.
I don´t like the stock-coils, they aren´t worth it...
but the RBA section is the right one for building coils very esay.
I use 28GA and build 1.5 to 1.8ohm coils.
Sure, the Delta II is a camaleon, you open the air flow and you get open draw!
If you close it almost completely,
you vape it mouth to loung and has a great flavor, even better than the nautilus mini I use outdoors...
And it looks so beautiful on my mod. Greetings to everybody.