I was having a few issues with my firing button. Sometimes it would hang up when trying to press it. I decided to try and fix it. The results are great.
I used and over sized drill bit on the piece the left to chamfer the edge of the hole. Be very careful to not drill all the way through. This would ruin the switch. On the piece on the left I used a file to bevel the shoulder just below the threads. It didn't take much to eliminate the hangups.
I used and over sized drill bit on the piece the left to chamfer the edge of the hole. Be very careful to not drill all the way through. This would ruin the switch. On the piece on the left I used a file to bevel the shoulder just below the threads. It didn't take much to eliminate the hangups.
