Unflavored nic juice
- Thread starter PoeDung
- Start date
- th_trl_thread_readers 0
- Status
unflavored is probably the safest of all liquids since it has no flavoring. I vape unflavored at 50/50 PG/VG 18mg nicotine. I make my own for around $1.00 30ml. it is very simple to make. you will need to get the following and it will last you four or five months.
240ml VG
240ml PG 36mg nicotine
combine the two to make 480ml of 50/50 PG/VG 18mg nicotine.
you will also need 4 120ml bottles in either blue or brown glass. fill up 3 of the bottles to the brim and put on the cap. place them in a plastic bag and eliminate as much air as possible. place them in the freezer for future use. use the last bottle. get a plastic syringe with a 14 gage blount tip for extracting the eliquid from the bottle to your tank. by the way you can use something like a mixing cup to mix the VG and PGnic base. you can make a funnel out of aluminum foil to pour the mix in the bottles. All of this you can get from RTSVapes or WizardLabs. Good luck.
240ml VG
240ml PG 36mg nicotine
combine the two to make 480ml of 50/50 PG/VG 18mg nicotine.
you will also need 4 120ml bottles in either blue or brown glass. fill up 3 of the bottles to the brim and put on the cap. place them in a plastic bag and eliminate as much air as possible. place them in the freezer for future use. use the last bottle. get a plastic syringe with a 14 gage blount tip for extracting the eliquid from the bottle to your tank. by the way you can use something like a mixing cup to mix the VG and PGnic base. you can make a funnel out of aluminum foil to pour the mix in the bottles. All of this you can get from RTSVapes or WizardLabs. Good luck.
You can buy direct from WizardLabs.us, a supplier many of us use quite often, and save some money in the process. At MBV, 236ml of UF @ 36mg/ml is going to run you $29.99 whereas it's $16.29 for 250ml of 36mg/ml at WizardLabs. Shipping at both places in pretty much the same, but MBV does have one thing over WL - speed of order processing and shipment.
I've order from WL quite a bit and sometimes it takes 2-3 days for an order to be processed and shipped. With MBV, 100% of my orders have shipped same-day and I've received them in 2-3 days.
The only thing you need to do is make sure you dilute the nicotine down to your preferred levels. So you would by your Nicotine in a PG or VG solution, then dilute it down with more PG/VG to get it to where you need it to be.
I've order from WL quite a bit and sometimes it takes 2-3 days for an order to be processed and shipped. With MBV, 100% of my orders have shipped same-day and I've received them in 2-3 days.
The only thing you need to do is make sure you dilute the nicotine down to your preferred levels. So you would by your Nicotine in a PG or VG solution, then dilute it down with more PG/VG to get it to where you need it to be.
I buy nic from wizard labs for my own DIY and it works for me. Yes you can vape the unflavor juice, just make sure it is the nic level you intend to use.
I'm going to try this myself. I just got a sample bottle from MBV of unflavored juice and I like it more than I do any flavor juices that I have tried so far. So I'm going to order bigger size. I checked wizard labs and they only have 12mg solution which I will need to dilute.
so if I order 100ml 12mg 100% PG nic base in order to make it 6mg I would have to get 100ml of VG and dilute it one to one to make it 50/50 PG/VG base of 6mg?
What do i need to do if I want to make it 80PG/20VG 6mg?
Thanks
Alex
so if I order 100ml 12mg 100% PG nic base in order to make it 6mg I would have to get 100ml of VG and dilute it one to one to make it 50/50 PG/VG base of 6mg?
What do i need to do if I want to make it 80PG/20VG 6mg?
Thanks
Alex
- Status
