Upgrading equipment!
- Thread starter Tshoffner
- Start date
- th_trl_thread_readers 0
- Status
Those are both good batteries. Check the size and compare to what you are using now - that should help you decide.
Iclear 16 is cheap but has replaceable heads - the coils do last quite a while.
http://www.fasttech.com/products/1411/10005988/1384000
Iclear 16 is cheap but has replaceable heads - the coils do last quite a while.
http://www.fasttech.com/products/1411/10005988/1384000
My first 510 battery was a 1300 mah Vision Spinner, the battery was pretty good and lasted me 4-6hrs with heavy use at higher volts. The only issue I had was the dongle chargers were not reliable, and I had some that never worked and others that didn't last more than a week and would show a false charge, I give it to a friend and the spinner worked but he went through a couple chargers and gave up.
I would suggest a pass through since the micro usb cable will be more reliable and easier to replace and you can also vape while it's plugged in.
You're welcome, it's a great feature IMO, when I had my spinner, I struggled more with trying not to smoke while it was on the charger. Just try to find a good reliable pass through device with a higher mah rating if you're lifestyle doesn't allow to be close to a USB port and if you are a heavy vaper and like the higher voltage settings.
If you are willing to invest a little more, many ECF members recommend getting the MVP2 which also has a pass through but has a 2600 mah battery and can be found online from about $50-100 depending where.
I'm not recommending this site, but linking to show you the product.
http://www.myvaporstore.com/Innokin_iTaste_MVP_V2_0_p/ink-mvp2.htm
All the eGos I have are passthrough I got an eGo V V2 Mega 1300mah a couple of weeks ago to take to work with me and it is an awesome little battery; does up to 5 volts woohoo! I use a Protank 3 on it @ 2 ohms
I use the Spinner II (i have three) battery and two evod tanks for each flavor I use. Works great for me. I tried to rebuild the coils but found some authentic coils on line for under $1.00 which was much less brain damage then trying to do the clean, dry burn etc.With the flavors I use, except for a dark Mocha i get 15 to 20 days out of each coil.
If 101 Vape doesn't have it in stock try https://www.completevape.com/search?Q=MVP&As=false&Cid=0&Isc=false&Mid=0&Pf=&Pt=&Sid=false. They are reasonable on their prices. Do a search for a coupon and get more off. Good luck and Happy Vaping!
Innokin[emoji769] iTaste VV/VW v3.0 Express Kit $20.99 Genuine Innokin
Be sure to use the following coupon code <font color="#B22222"> ITASTEVV24″
Be sure to use the following coupon code <font color="#B22222"> ITASTEVV24″
Yes you can do it. Just like a pro tank. But ther are tempermental finding the right amount of wick can be tricky. It lies in the sweet spot between gurgley leaks and dry hits. Replacements are o ly a couple bucks so why go through all that aggrivation. If your interested in building think about an rda with regulated or mech mod. WAY BETTER!
I mentioned I was NOT recommending that site, it was just a link that the OP could look at to see the device and specs.
Last edited:
I have both and like both. If I had to choose I would pick the vv3, I really like the "square" feature that keeps it from rolling off of desks and tables.
I think that protanks, or protank minis (either 2 or 3) are the next progression from the T3s. I love the mini pt2 with the aerotank base. That said, you could just get the aerotanks. Problem with the mini pt3 is that the new kanger dual coils are insulated like the aspire bdc coils so they are harder to rebuild and dry burn than the original coils in the protanks, evods and even t3s.
I think that protanks, or protank minis (either 2 or 3) are the next progression from the T3s. I love the mini pt2 with the aerotank base. That said, you could just get the aerotanks. Problem with the mini pt3 is that the new kanger dual coils are insulated like the aspire bdc coils so they are harder to rebuild and dry burn than the original coils in the protanks, evods and even t3s.
Thanks for the feedback! I pretty much decided on the v.3 and have looked at the aero tanks and pro tanks! I'll see if somewhere local will let me test one then buy it online because prices at my local vapeshops are rediiculous!
Protanks are solid performers. I have a Protank and a Protank 3 admittedly the Protank is a standby now and the PT3 is the main I still used the PT this past weekend before I rebuilt some coils for the PT3.
Thanks for all the input! I have decided on a protank 2. I have built plenty of single coils do you rebuild dual coils for your pt3?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Status
Similar threads
