Using stardust clearomizer

[kbalz]

Just started using stardust clearomizer, every now and then i get juice in my mouth (yummy). Its not every hit, and i dont feel like im drawing to hard on it. what is causing this or what am i doing wrong, or is this common ? Drip tip is screwed all the way down .

 

[PittBoss]

Sometimes the drip tip sits on the silicone cap slightly awkward and can let a bit of liquid through. Also, it seems that if that cap isn't sitting properly over the coil, it can allow some to get in there as well.

 

[Pappy]

I don't know the reason, but it does happen sometimes. I think the juice wicks into the atomizer area and then gets pulled up into the mouthpiece either by drawing on it or when the clearo is stored with the mouthpiece lower than the rest of the body.

 

[Axident]

Another possibility might be that when you were filling it some of the liquid went down the center hole. Just a thought though.

 

[electriclady]

This is definitely a clearo you have got to keep upright as juice will leak down to the drip tip. If it's not making a gurgling sound, then you haven't overfilled it into the central post - just remember to keep the juice fill level just below the maximum line - it's so easy to overfill it. I think they're great, so I hope you get it sorted!

 

[kbalz]

Another possibility might be that when you were filling it some of the liquid went down the center hole. Just a thought though.

I made sure i was extra careful not to

 

[kbalz]

This is definitely a clearo you have got to keep upright as juice will leak down to the drip tip. If it's not making a gurgling sound, then you haven't overfilled it into the central post - just remember to keep the juice fill level just below the maximum line - it's so easy to overfill it. I think they're great, so I hope you get it sorted!

This maybe the problem , i was keeping it totally horizontal when hitting it, and seen that it could actually, maybe leak through the tip base. so i have been trying to keep it more vertical. When i filled it i did take it to the max fill line. So i should keep it a little below line ? haven't noticed any gurgling. btw hoosiersecigsupply.com caramel cappucinno is pretty freaking tasty ; )

 

[microgluf]

On other mod I've done when I occasionally use the stardust (CE4+) is to drill 1 or 2 holes at the bottom with a dremel to allow for more air. I noticed the eGo connector restricts air too much for a nice smooth draw... including the eGo /510 adapter on my provari or other battery mod.