vamo issues

Status
Not open for further replies.

thekill

Full Member
Dec 27, 2014
49
13
36
Limon, CO
Okay so I just got the new vamo v2 and I'm having some problems with it first off the two batteries are 18 350's, and they say 3.7 volts. i let them initially charge for a while because usually you're supposed to let batteries initially charge for a bit longer than usual charging .after about 2 hours the red light on the charger was still red, so I started looking up some stuff to find out why they were charging so long. I came across a bunch of results saying they're only supposed to charge for like an hour, about thattime I got worried and I took them off the charger and began to put them in my vam o v2. I used it special function to test the battery voltage, and instead of it being 3.7 ike how it said ithe batteries max was supposed to be on my family rea. Now every hit that I take off of every single clearomizer that I tried it on so far she's about 5 different kinds the taste of it is just been absolutely horrible. It tastes like a burnt wick but even worse than that by a lot. I'm vaping off of the lowest amount of volts and Watts this thing is capable of and it still tastes that way can anyone please help me find out why this is happening and how to fix it. Thank you in any respeatly appreciated
 

Rickajho

ECF Guru
ECF Veteran
Verified Member
Apr 23, 2011
11,841
21,763
Boston MA

What Chomper said. If a VAMO V2 is in the wrong operating mode it can produce a really harsh vape.

I don't know what you were reading and from where, but there is no "rule" that a battery is charged in an hour. It depends on the battery, it's capacity, the charger and it's charging current, how depleted the battery is etc. 18350's might be done in an hour - or might be done charging in three or four hours. Or some place in between...
 

chomper33

Senior Member
Sep 22, 2014
111
107
USA
What kind of charger do you have? I noticed you said it had a little red light and it reminded me of those cheap Chinese chargers on ebay. If you do have one of those, I would recommend getting a charger with built in protections like a Nitecore i2 or better. While there are always potential hazards, there is less worry with a decent charger.
 

thekill

Full Member
Dec 27, 2014
49
13
36
Limon, CO
Ok well. i think we got off track. I did what you suggested, put it in that second mode. i still however have that problem with it burning out all of my clearo's. is it possible this is just a defective one? because i have it set to a lower voltage and wattage thank my other mod, and they still vape completley differently. I think the vamo is putting out much more volts than is displayed on the screen.
 

Train2

ECF Guru
ECF Veteran
Verified Member
May 11, 2013
12,273
36,193
CA, USA
I don't remember - Do you have to "tell" a VAMO that you're stacking batteries?
I seem to recall something about resetting a VAMO if you were going to go from stacked to not-stacked...but that was before there WAS a Vamo2. Maybe you have to go to settings for that now and change it for stacked batteries - that would explain over-powering everything...
 

Marvic

Full Member
Jan 8, 2015
10
8
Porto, Portugal
Well i contacted the seller and am going to possibly ask for a refund. In that case i can upgrade as well. Vamo v6 or tesla tube:D
My choice would be the vamo v6. The days will come where you will find yourself buying new and more advanced tanks and/or rebuildables and when that times come you will have a better device for your improvements. Make sure your clearo's are working correctly by using them on a different mod in a B&M shop or in a different device a friend or you may have. If everything is ok with your tanks and you are running on RMS than probably you have a problem on that older vamo. All my vamos lasted me a long way. They are very nice devices at a decent price. Make sure you get a good charger like the nitecore i2 as someone mentioned and organize your batteries and charging cicles properly - try to swith between batteries in a fixed order and charge them in the same order. You can lable them with numbers and date of first use so in a year from now you will know your batteries are getting old and need to be replaced. :)
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread