Vaporesso GEN NANO Kit 80w

[Frenkyou]

vaporesso gen nano 80w

The Gen Nano is the latest device from the well-known manufacturer Vaporesso.
As the name implies, it is the mini version of the famous GEN of 2019.
The Mod is fully adjustable, capable of reaching up to 80W and is equipped with the advanced Axon chip with full functionality. It is powered by an integrated 2000 mAh battery.

Use a 3.5ml GTX tank with two GTX coil options included in the kit.
The form factor and design of the Gen Nano are on a smaller scale than the original Gen.

Compared to the GTX One with which it shares the same GTX series coil platform, the Gen Nano uses a new 22mm GTX tank.

Enjoy the reading

On the front of the package we see the image of the kit that occupies most of the available space.
The color and images of the packaging do not faithfully reflect the color option of this sample.

On the back there are the specifications, the content, the conformity logos, the warnings and the authenticity check.
While on the side the main features are shown in the form of an icon.

Package contents:
1 Vaporesso Gen Nano Mod
1 Vaporesso GTX Tank 22mm 3.5ml (TPD 2ml)
1 Mesh Coil GTX 0.2Ω 45W-60W
1 Mesh Coil GTX 0.6Ω 20W-30W
1 2 ml straight glass tube
1 bag of spare O-rings
1 Micro USB Micro cable
1 User manual

Specifications of the Vaporesso Gen Nano kit:
Dimensions: 40.3mm x 24.2mm x 115mm including Drip Tip
Weight: only mod 85g
Output power: 5-80 W
Resistance range supported: 0.15-5Ω
Battery type: Internal 2000 mAh.
Charging current: DC 5V / 2A, Micro USB
Available modes: VW Mode, Pulse Mode, Power ECO Mode, Smart TC Mode, DIY Mode.
Gen Nano construction material: fireproof polycarbonate, metal spray, breathable rubber.
Construction material Tank GTX 22: Stainless steel, Pyrex glass.
Available colours:
The mod is available in six different colors that fade in black towards the bottom, all except the silver color which is mono chromatic.

How Gen Nano is made:
The shape is basically rectangular with smooth and rounded edges.

One thing I really like in the GEN line is the tactile feeling that is established by touching the side panels composed of a first layer of fireproof polycarbonate, four coats of metal spray and a breathable rubber coating.
The surface finish offers good hand grip.

On a side panel the Vaporesso brand is located in the center with the micro USB port for charging alongside.
The small V-logo is located at the bottom on the opposite side.

The surfaces on the perimeter are as smooth as oil and seem to be covered with a layer of rubberized paint just as pleasant to the touch.

On the front of the device the 0.91-inch black and white OLED screen is bright and offers a good reading.
The Fire button is located at the top above the screen, the three adjustment buttons are located below the screen.

The cup is centered, houses atomizers up to 25mm in diameter without protrusions, takes the color of the fire button, pin 510 is spring loaded and is plated / gold.

At the bottom of the device, you can view the manufacturer's information and ten vent holes for the battery.

How the Gen Nano 80W works:

With the classic 5 clicks on the Fire button, to get on / off. With 3 clicks on the fire to lock / unlock the screen.
To rotate the screen, simply click Up / Fire or Down / Fire simultaneously.

 

[Frenkyou]

Choose a mode.
With the screen unlocked, pressing the Mode button 3 consecutive times to enter the menu

- PUL mode: Pulse Mode, this mode is active by default every time we screw a new tank, the pulse frequency is close (every 0.02 seconds)

- ECO Mode: Eco Mode, with the remaining battery charge less than 40% the device will provide an option to automatically insert the power eco.

-STC: Smart Temperature Control Mode, when the following wire of our resistance is detected (ss / ti / ni), the device will provide an option to automatically access the STC mode (smart TC).

-DIY: Diy Mode, in this section you can choose the traditional VW (H N S), VW, VT, CCW, BP (bypass) and SP (super player) modes. When the coil resistance is extremely low, the device will provide an option to automatically access SP (super player) mode.

- SET: System setting, navigating in this configuration, we find the Puff counter, screen brightness, smart VW, ECO car on / off by default, so we can customize the operating interface.

Note: When the setting is on VW the ideal power is automatically recommended.

- choosing VWH we will have a prompt reaction to the fire button with an aggressive power supply curve.
- choosing VWN we will have a normal reaction to the fire button with a normal delivery of the power curve.
- choosing VWS we will have a slower reaction to the fire button with a soft and progressive supply of power.
1st image above

VT-SS / VT-NI / VT-TI / VT-MI Variable temperature control, ss, ni and ti modes are only available for stainless steel, sus 316l, nickel200 and titanium materials. With the Mi mode, we can make a custom setting for using other types of thread.
2nd image above

VV (Variable Voltage Mode) in this configuration we can customize the voltage value according to our needs.
3rd image above

CCW (Customize the supply curve in Wattage mode)
press the (+) and (-) buttons to customize your output power curve, go to the next bar with a quick pressure on the fire button, press the mode button to save and exit when the setting is complete.
1st image below

BP (Bypass mode) a correct direct output voltage mode, it depends on the battery charge level during use, in Bypass the supported resistance range is from 0.15Ω to 5Ω
2nd image below

SP (Super Player Mode)
In this mode, the device supports a wider resistance range from 0.03Ω to 5Ω.
3rd image below

During the 2A charging phase, the screen shows the percentage and the time remaining.
A full charge cycle takes 60 minutes.
At 45W I managed to make 220 puffs! It is a very good result for an integrated 2,000mAh battery.

Protections and security:
Overtime Protection 10s
Overheating protection
Protection without load
Short circuit protection
Low battery protection
USB input protection
Dry shooting protection in Smart TC mode

Tank GTX 22mm:
It is a new 3.5ml tank, with a Drip-Tip 510 connection of simple construction and without liquid control.
It uses the Coil GTX platform and the RBA GTX base, it is compatible with many other Vaporesso atom and pods.
It essentially consists of six pieces.

To refill, unscrew the top cap (1st image). The knurled surface of the top cap helps with this.
The base bears the inscription "GTX TANK 22", the C E mark, the disposal logo, "Made in China", a serial number. The connection pin is fixed. (2nd image)
The GTX coils are inserted with the Push and Pull system (3rd and 4th images)

The air ring nut is fully adjustable, its surface is knurled, for optimal grip, the air passes through two opposing 8x2mm slots.

Coil and performance:

- GTX 0.2Ω Mesh with 45-60W range (included in the Gen Nano kit) on this Atom is my favorite, we had already seen it on the previous PM80 it is specifically designed for the DTL, it produces a large amount of hot steam and a rich aromatic production, by default the AXON chip the sect at 55W, given the good reactivity of the Mesh and the thrust of the circuit (insta-fire) I find that at 45W with the ring completely open it is a more than satisfactory vape.

- GTX 0.3Ω Mesh with a range of 32-45W: this one as well as the previous one is designed for the Flavor (we had already seen it on the previous PM80) it is set automatically by the Smart function at 35W, compared to the previous one it emits less steam hot, in my opinion it is the most balanced in flavor and also in terms of yield / battery life, I used it at 32W with the ring nut almost completely open but also completely open, thus finding my best configuration for this Coil.

- GTX 0.6Ω Mesh with 20-30W range (included in the Gen Nano kit) is designed for a Restricted Flavor, the Smart function sets it to 22W automatically, I found the best yield at 25W with the slots of the ring nut open for 1/3, I find it very balanced on the performance / battery consumption side. Pleasant with creamy liquids.

- GTX 0.8Ω Mesh 12-20W was introduced by Vaporesso for the PM30 (also tested with the 18mm Tank GTX), on our Gen Nano it is set automatically by the Smart function at 16W.
I found this new GTX discreet also on the 22mm Tank GTX with rather closed air setting, the hit and the yield with different mg / ml is satisfying, the steam emitted is hot at the right point in relation to the MTL sub-ohm Puff.

- GTX 1.2Ω Regular 8-12W is the most choked of the lot, it is set by the Smart Function to 10W by default, it is not among my favorites on the GTX 22 tank, too cold, but I must say that it works well, at 10W it does not I would never have believed in such a copious supply of steam and such a high reactivity, moreover the consumption of liquids / battery is really negligible.

- Coil GTX Mesh 1,2Ω (7-11W)
The best performance for this coil is between 9 and 11W with the very partialized air flow, the aroma for my creamy liquids is faithful, the steam production is discreet and tending to fat (as I like it) the vape is never too hot, but not too cold, this is a coil that moreover consumes very little liquid and battery.

- GTX-RBA, which can be purchased separately, has a large Air-flow slot, therefore it also allows, based on the coils that are built, to vape well in flavor, also well in MTL / open configuration by much partializing the external ring of the Tank GTX 22.

If you are looking for a small device, with many functions, well made, at a good price, this GEN Nano is for you.

Gen Nano Highlight Kit:

Pro:
Ultra-portable and light
Good build quality
Accurate soft-touch coating
Clickable and responsive buttons
Feature-rich Axon chip
Easy to use
Clear and bright screen
Very good coil yield
Charging time
Fully adjustable air Flow
Many puffs even at 45W with the 2000mAh battery
Compatible with all Coil GTX
Optional RBA base
Price

Tips:
Some liquid leakage after filling
-------------------------------------------------- --------
I thank Vaporesso for sending this sample: Gen Nano » Vaporesso

Thank you