just as the title states, my one plus cascade wont fire with the 0.3 ohm ccell coils. the fire button just flashes green. is there anything i can do to fix it?
vaporesso one plus cascade doesnt work with 0.3 ohm coils
- Thread starter theunforgiven1
- Start date
- th_trl_thread_readers 0
- Status
It flashes green 3 times. No I don't have any other mod to try the tank on unfortunately. It works fine with the .18 ohm coil. I bought it from element vape.com, I figured since it works fine with one coil I couldn't return it
I understand. Did you read the instruction manual (not implying anything... just have to ask lots of questions) Was the tank empty when you changed coils? Don't laugh, but my first device I couldn't get it to turn on... click 5 times quickly. Finally figured out they mean really fast! Don't know if it matters, but I always turn my device off when charging (just throwing out anything I can think of) Do you have another wall charger you can try with the USB cord? I seem to remember my Evod would blink 3 times if the coil was shorted out (or open circuit... don't recall which)
Sidenote: don't get coils from e-bay (learned that the hard way)
Sidenote: don't get coils from e-bay (learned that the hard way)
I have tried 2 of those coils and I had the same problem. I went to the local vape shop and they said the resistance could be to high for a 50 watt mod. I figured that they were full of crap but you never know. I've got my eye
on a vaporesso luxe s and I would put a falcon king tank on top of it
on a vaporesso luxe s and I would put a falcon king tank on top of it
Just to clarify... the tank and mod came together as a kit? I hate to say it, but many local vape shops either give bad advice, misinformation or just try to sell you a Smok device (or all three) Maybe they thought you had a "mech" mod.
Vaporesso Luxe
Falcon King is great too but too full blown DL for me.
Vaporesso Luxe
Falcon King is great too but too full blown DL for me.yes i bought a starter kit from elementvape.com. here is a link to what i bought. Vaporesso CASCADE ONE / ONE PLUS SE Starter KitJust to clarify... the tank and mod came together as a kit? I hate to say it, but many local vape shops either give bad advice, misinformation or just try to sell you a Smok device (or all three) Maybe they thought you had a "mech" mod.
Vaporesso Luxe
btw i got the black with the red tiger and red tank. it looks freakin awesome and i like vaping with it just sucks it doesnt work with the ccell coils. ive heard they are great for flavor. the .18 ohm coils arent bad for flavor just a little muted. im vaping either halos torque 56 or turkish tobacco high pg 24mg nic [not the nic. salts]
It does sound like bad coils but since it's not just one coil I'm baffled. Maybe you over-tightened the coils (possibly causing the wire inside to come loose or short out) Only other thing I can think of is the 510 connection on the tank is not making contact with the battery (I have some tanks that do this with one mod... center pin doesn't quite stick out enough) but that is so unlikely because it is a kit (and would do this with either coil) I would take the tank to the vape shop and have them put it on a mod that reads ohms. Where did you get the ccell coils?
The coils don't screw in they just sit in there loosely. I ordered coils from the electrictobacconist.com
Well then... there's your problem. Did you watch the video I posted? "Screw down coil" (12 minutes into the video)
Do you have the original Cascade tank? It does use press in coils... here's the specs:
Features:
Features:
- 25mm Base Diameter
- 28mm Glass Tank Diameter
- Stainless Steel & Pyrex Glass Construction
- Sliding Top Fill Design
- 7ml E-Liquid Capacity
- GTM Coils
- Threadless Plug-Pull Coil Design
- O-Ring Secured
- GTM-2 0.4Ω Vertical Single Coil
- Wattage Range: 40W - 80W
- GTM-8 0.15Ω Vertical Clapton Quad Coil
- Wattage Range: 80W - 200W
- GT Coil Adaptor
- Compatible With NRG GT Coils
- Threadless Plug-Pull Coil Design
- Triple Adjustable Bottom Airflow
- 11mm by 3mm Slots
- Heat Insulating Disc
- 510 Drip Tip Compatible
- Silver Plated Pin
There are 3 versions of the Cascade tank. The OG, or just Cascade (25mm), which takes press in coils, with an adapter to accept GT Core Coils. The adapter still requires the GT Core coil to be screwed in
The Cascade Baby SE (24 mm) and Baby (22mm) are smaller versions. They accept screw in GT Core coils only (or coils modeled around the TFV8 dimension).
The Cascade One (22mm) and One Plus (24mm) kits use the Cascade Baby and Baby SE tanks.
The Cascade Baby SE (24 mm) and Baby (22mm) are smaller versions. They accept screw in GT Core coils only (or coils modeled around the TFV8 dimension).
The Cascade One (22mm) and One Plus (24mm) kits use the Cascade Baby and Baby SE tanks.
Last edited:
@vaper1960, the GT coil adapter has to be used with GT coils.
You unscrew the 2 parts, then screw the GT coil in the bottom half and then screw the top half back on. Then you can insert it the same as a GTM coil and use it.
Was one of my most favourite tanks, but it did have a habit of leaking.
You unscrew the 2 parts, then screw the GT coil in the bottom half and then screw the top half back on. Then you can insert it the same as a GTM coil and use it.
Was one of my most favourite tanks, but it did have a habit of leaking.
- Status
Similar threads
- Locked
- Locked
- Locked